Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in December 2025.
The most recent job was on December 17, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Replace suction and liquid line sensors under warranty. I’ll start up compressor with sounding very rough on startup. Ran unit for 30 minutes. Refrigerant pressures were within manufacturer specifications. Measured start amps on compressor and found them to be high testing around 83 out of 83. Recommended hard start kit to homeowner to help reduce start amps and therefore wear and tear on the compressor overtime, as the most wear happens on the initial start up of the compressor. Cycled unit on and off periodically allowing for rest time to ensure unit functionality. Tested supply heat and measured 110° without the heat kit running. Return temperature 74. I was not able to verify the addition of a bypassed the zone system, as there was not nearly enough space in the attic, and no dampers could be seen from the supply box. Recommend installing Trane thermostats to get the most functionality and efficiency out of the Trane units. Also suggested labor warranty since unit may have been ins
Upon arrival, the customer filled me in on the issue. The heating strips were not doing their job when emergency heat is engaged. The customer and I proceeded to the attic to investigate. I found that the breaker was disengaged for 10kw of the heat. I turned it on and confirmed that all heating strips are operational. I noticed that the heating strips are wired to run a higher than recommend blower speed. This was causing the temperature rise to only be 13 degrees. I got confirmation from the customer to adjust the wiring. The new temperature rise is 42 degrees. I cycled it a couple of times and verified it was going to perform properly. Blower is set to a higher speed and moving too much air across the heat strips. This is not allowing the heating strips to gain enough heat. Customer would like to wait to sign up for maintenance.
I performed a single heating maintenance on a 2017 heat pump system. I checked amps, capacitor, cleanliness, electrical, safeties, and connections. I thoroughly examined the indoor unit. I noticed that the evaporator coil is oxidized causing efficiency to be reduced. I proceeded outside and went to disengage the disconnected and determined that the copper blades were welded. This means the service disconnect has failed and is inoperable. The 70/7.5 capacitor was reading low on the compressor side 66/70. The unit currently does not have surge protection. Customer approved replacement of the disconnect and 70/7.5 warranty capacitor during time of service.
Arrived on site for no heat call. Homeowner stated unit was running constantly and not holding setpoint. Homeowner had also noticed that the condenser was making a loud buzzing noise. Inspected thermostats and indoor unit and found call for heat working is intended. Upon inspecting the outdoor unit, I noticed the loud buzzing noise the homeowner was referring to. It sounded like the compressor was struggling to pump it first, but then would even itself out. Upon hooking up refrigerant gauges I found the pressures to be within manufacture specifications, however, after running for a short amount of time, low side pressure would drop and high side pressure with rise indicating an issue with the EEV operation. I then tested the suction and liquid line sensors and found them both to be reading around 20 to 23 K ohms. This indicates temperatures are around 130 to 140°. this reading is well outside of manufacture spec as well as current temperatures. Discussed with homeowner possible options
Level 1 condenser combing scheduled for 12/15 at 10-12 window of arrival. Once work is completed. Invoice can be emailed out with before and after photos.
-Contactor -Turbo Multi Use Capacitor - 5-2-1 Hard Start Kit CLEAR DRAIN BLOCK - USING NITROGEN ONLY LEVEL 3 CONDENSATE DRAIN LINES NEED TO BE CLEANED OR THEY CAN CLOG WITH ALGAE AND DEBRIS Includes shop vacuuming when necessary and 1 PVC Coupling Also installation of a Quickblast PVC fitting, SS1 Safety Switch, P-Trap, and Vent Pipe. 60” x32” secondary drain pan with pan spray sealant. VIP Annual Service Agreement - 3 Unit Fall & Spring Annual Maintenance Visits 10% Discount on Repairs Discounted $45 Travel Fee (Usually $79!) Preferred Customer!
I performed a single system heating maintenance on a 2017 zoned gas system. I checked amps, capacitors, ohms, electrical, cleanliness, and safeties. During my thorough evaluation, I noticed that the ohm value of the hot surface igniter is reading way below normal range. It is only reading 14ohms and indicates a lack of resistance. I took a photo of it showing a huge white spot. These are signs that he igniter does not have much life left. Also, I had the furnace trip on the high limit switch during operation. I confirmed that the air was not hot enough yet to result in tripping. The high temperature switch is tripping before its 190 degree limit and allowing the system to come back on immediately. These switches are design to cut out and allow time to cool the switch by 30degrees. I verified that the warranty is expired and priced these failing parts. I offered to install surge protection, as well.
I performed a single heating maintenance on a 2023 Lennox gas system. I checked amps, filter, electrical, cleanliness, and safeties. Once I proceeded to the attic I heard a noise coming from the furnace. I opened the system up and began checking. I discovered that the noise is coming from the blower motor. Customer stated that you can’t hear it from within the home. I determined that the bearings are worn on the blower motor resulting is a noise that is deemed not normal. The blower motor is an X13 and still covered by warranty. I noticed that the unit does not have surge protection and offered it as well. Customer declined repairs at the time of service.
I performed a single system heating maintenance on a 2017 zoned gas system. I checked amps, filter, electrical, flame sensor, igniter, cleanliness, and safeties. The system is heating and performing well. Customer and I spoke about air quality and a noise when the furnace comes on. I observed that the outdoor unit did not have surge protection and the primary drain did not have a water safety switch. The noise from the furnace was caused by debris build up in the flue pipe and inducer motor. I provided options to improve air quality, safety, and remove the debris. Customer opted to clean the inducer only and for me to email the airscrubber pricing. I performed the work at the time of service and collected. The system is performing inside of manufacture specifications at departure.
I performed a single system system heating maintenance on a 2020 zoned heat pump. I checked amps, capacitor, filter, electrical, cleanliness, and zoning system. I found that the downstairs damage is unwired. With it being faulty, this is keep the downstairs damper open and will heat when the upstairs heats. Also, I observed that the compressor is beginning to pull high amps on start up. To prevent future damage to the compressor, I offered adding a start assist to lower the stress on the compressor. I gave the customer a bundle option to get all of the work done. The customer declined at the time of service.

