Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in November 2025.
The most recent job was on November 13, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I preformed a single system heat maintenance on a 2021 heat hump. On my inspection of the thermostat I found that there was no power being supplied to the thermostat. I then proceeded up to the attic where I found that there was a breaker tripped in the air handler. When I turned it back on the breaker wasn’t receiving 240 volts. I then checked the main breaker box and found that the furnace breaker was tripped. I reset the breaker and proceeded back up to the attic to find a blown fuse. I replaced the fuse and restored power. Everything was working at first, then after a few minutes of running the unit tripped the main breaker again. I found the heat sequencers to be faulty causing the unit to trip the main breaker. I unwired the heat sequencers from the unit and provided a call for just heat using the heat pump. The heat pump is working properly. Upon further inspection of the unit I found the return duct, blower wheel and plenum boxes to be extremely dusty. I proceeded outside to ch
Preformed single system heat maintenance on 2021 Trane heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. Client needed filter change . Client elected to have one provided to them. I changed filter Aprilaire 210. I tested all electrical components on the outside unit. All tested within manufacturer specifications. Unit was cooling upon departure.
I performed a heating maintenance on a 2021 gas system. I checked amps, capacitors, filter, electrical, and safeties. The system is heating inside of manufacture specifications. I proposed options for surge protection and upgrading his filtration. Filter currently has a 1” gap at the top allowing dust to bypass the filter. Customer has a generator with no need for the surge protector and was undecided on the filter upgrade.
Upon arrival client stated that he turned the heat on last night and it came on for a few minutes then shut off and wouldn’t come back on. He then turned the thermostat to cool to see if the unit would come on and it did. I started by changing he thermostat over to heat mode and heard the click for heating but no fan or heat was being provided to the home. I went into the attic and tested the heat strips and no power was being applied to them or tithe fan. I jumped the R terminal to W to provide a call for her and everything came on and tested within manufacturer specifications. I then proceeded to the thermostat where I jumped R to W again to insure all wiring was good. After jumping it at the thermostat the system came on and was providing heat to the home. That indicated hat the thermostat was malfunctioning. I presented our client with my findings and he elected to have a new thermostat installed. I installed the T6 pro thermostat and tested all modes to insure proper function. Uni
Preformed heat maintenance on a single system heat pump zoned 2022. Tested all electrical components on inside unit. All tested within manufacturer specifications. I did find that there was some growth forming inside the blower compartment. I left estimates to have all uv light installed along with a Aprilaire conversion kit. I tested all electrical components on the outside unit. All tested within manufacturer specifications. Unit was heating upon departure.
On site for heating maintenance on two system 2019 Goodman furnaces. Homeowner stated all was well with regards to normal system operation. Begin heating maintenance as scheduled. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. All was well with normal heating operation. I did check some cooling components since this is our first visit here. I found bad capacitors on both units. The downstairs was testing low and the upstairs was completely dead. T
Preformed dryer vent cleaning and changed out 60 amp breaker on air handler. Presented before and after photos to client. Client was satisfied with results. Preformed heating maintenance on a single system heat pump 2019. Tested all electrical components on the inside unit. All tested within manufacturer specifications. I tested all electrical components on the outside unit. All electrical components tested within manufacturer specifications. When I tested the breaker to turn off the air handler I found that it was faulty. When turning it back on it wouldn’t send power to the unit, unless I pressed the on handled more. This was not allowing it to make a good connection. Homeowner elected to have it replaced. Unit was heating upon departure. 2 POLE CIRCUIT BREAKER 35 - 60 AMP BREAKERS FAIL IF OVERHEATED OR REPEATEDLY FLIPPED AND WILL NEED TO BE REPLACED. MOST BREAKERS ARE NOT UNIVERSAL AND MIGHT NEED TO BE SPECIAL ORDERED, DEPENDING ON THE PANEL. SPECIAL ORDERS MAY INCUR AN ADDED CHA
Preformed heating maintenance on a single system heat pump 2020. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I did however find that the return ducts, plenum boxes and blower wheel to have a good amount of dust/debris. I left estimates to have all of those concerns addressed. The supply temp to the house was at 134 degrees and 70 return. I tested all electrical components on the outside unit and all tested within manufacturer specifications. The start amps on the compressor were reading over manufacturer specifications. I left estimates to have that concern addressed as well. Unit was heating upon departure.
Upon arrival client stated that water was coming out of the unit onto the floor. I tested the drain line and there was a minor blockage causing the water to back up into the unit. I removed the blockage and the water was drain properly. I then investigated why the float switch did not engage when the water backed up. I found that the float switch head was none operational. I presented the client with the issue and she elected to have the head changed out to a new one. I installed the new float switch head and tested it. The float switch is now working properly. Unit was cooling upon departure
I performed a heating maintenance on heat pump systems from 2019. I checked amps, capacitors, filters, electrical, cleanliness, and safeties. I noticed that one of the ducts is coming off of the main unit. This is causing condensation to form and drip down the plenum. The smaller unit is in need of a hard start kit to assist the compressor. It is making a rough sounding noise when starting up. I observed that the outdoor units do not have surge protection. With winter right around the corner, I advise these safeties to be installed to help protect the equipment.

