Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX between October 2025 and November 2025.

The most recent job was on November 6, 2025.

Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Shelby S.
Shelby S.
I performed a heating maintenance on a zoned 2020 gas system. I checked amps, filter, cleanliness, electrical, and safeties. I noticed the ducts were beginning to have enough build up to become an issue. I noticed there were air cleaning devices around the house and presented the air scrubber. The plenum for the upstairs zone is coming apart. This is causing the unit to heat and cool the attic space. Customer wants to renew membership. Customer became unavailable and left for work before I could collect. We will need to reach out in the morning to collect for renewal.
Anna, TX 75409
Anna, TX - I performed a heating maintenance on a zoned 2020 gas system. I checked amps, filter, cleanliness, electrical, and safeties. I noticed the ducts were beginning to have enough build up to become an issue. I noticed there were air cleaning devices around the house and presented the air scrubber. The plenum for the upstairs zone is coming apart. This is causing the unit to heat and cool the attic space. Customer wants to renew membership. Customer became unavailable and left for work before I could collect. We will need to reach out in the morning to collect for renewal.
Anna, TX - I performed a heating maintenance on a zoned 2020 gas system. I checked amps, filter, cleanliness, electrical, and safeties. I noticed the ducts were beginning to have enough build up to become an issue. I noticed there were air cleaning devices around the house and presented the air scrubber. The plenum for the upstairs zone is coming apart. This is causing the unit to heat and cool the attic space. Customer wants to renew membership. Customer became unavailable and left for work before I could collect. We will need to reach out in the morning to collect for renewal.
Jesse V.
Jesse V.
Kelsie built estimates in office and communicated with the client via call and text to schedule work.
Anna, TX 75409
Shelby S.
Shelby S.
We removed the x13 blower motor, cleaned the blower assembly to the best of our abilities, and installed a new blower motor. We tested the system to ensure proper operation. System is cooling upon departure.
Anna, TX 75409
Anna, TX - We removed the x13 blower motor, cleaned the blower assembly to the best of our abilities, and installed a new blower motor. We tested the system to ensure proper operation. System is cooling upon departure.
Anna, TX - We removed the x13 blower motor, cleaned the blower assembly to the best of our abilities, and installed a new blower motor. We tested the system to ensure proper operation. System is cooling upon departure.
Brayden W.
Brayden W.
Arrived on site for heating maintenance on 2019 carrier furnace. Homeowner stated all was well with normal system operation. Began scheduled inspection. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks- found gas leak at gas flex connection 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. Found gas leak at gas flex connection. I was able to tighten the connection and the gas leak went away. Extensively bubble tested gas line and found no further issues. Discussed blower cleaning with homeowner to
Anna, TX 75409
Anna, TX - Arrived on site for heating maintenance on 2019 carrier furnace. Homeowner stated all was well with normal system operation. Began scheduled inspection. 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks- found gas leak at gas flex connection
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
Found gas leak at gas flex connection. I was able to tighten the connection and the gas leak went away. Extensively bubble tested gas line and found no further issues. Discussed blower cleaning with homeowner to
Anna, TX - Arrived on site for heating maintenance on 2019 carrier furnace. Homeowner stated all was well with normal system operation. Began scheduled inspection. 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks- found gas leak at gas flex connection
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
Found gas leak at gas flex connection. I was able to tighten the connection and the gas leak went away. Extensively bubble tested gas line and found no further issues. Discussed blower cleaning with homeowner to
Matthew C.
Matthew C.
Preformed condenser combing. Before and after pictures have been uploaded. Power was restored to the unit upon departure.
Anna, TX 75409
Anna, TX - Preformed condenser combing. Before and after pictures have been uploaded. Power was restored to the unit upon departure.
Anna, TX - Preformed condenser combing. Before and after pictures have been uploaded. Power was restored to the unit upon departure.
Shelby S.
Shelby S.
System is a 2017 heat pump. The unit is not communicating or zoned. Upon arrival, I found that the blower motor bearings are worn. This was likely caused by the build up present. The blower wheel is spinning uneven. We will locate the aftermarket x13 blower motor tomorrow and reach back out with a timeline. The system is still currently cooling, but jacking noises and not spinning as well as it was.
Anna, TX 75409
Anna, TX - System is a 2017 heat pump. The unit is not communicating or zoned. 

Upon arrival, I found that the blower motor bearings are worn. This was likely caused by the build up present. The blower wheel is spinning uneven. We will locate the aftermarket x13 blower motor tomorrow and reach back out with a timeline. The system is still currently cooling, but jacking noises and not spinning as well as it was.
Anna, TX - System is a 2017 heat pump. The unit is not communicating or zoned. 

Upon arrival, I found that the blower motor bearings are worn. This was likely caused by the build up present. The blower wheel is spinning uneven. We will locate the aftermarket x13 blower motor tomorrow and reach back out with a timeline. The system is still currently cooling, but jacking noises and not spinning as well as it was.
Matthew C.
Matthew C.
Preformed heat kit replacement. Presented client with before and after pictures of work completed. Heat kit is testing within manufacturer specifications range. Supply temperature while heating was at 109 degrees and climbing. Before it was holding at 106 degrees. Unit was heating upon departure.
Anna, TX 75409
Anna, TX - Preformed heat kit replacement. Presented client with before and after pictures of work completed. Heat kit is testing within manufacturer specifications range. Supply temperature while heating was at 109 degrees and climbing. Before it was holding at 106 degrees. Unit was heating upon departure.
Anna, TX - Preformed heat kit replacement. Presented client with before and after pictures of work completed. Heat kit is testing within manufacturer specifications range. Supply temperature while heating was at 109 degrees and climbing. Before it was holding at 106 degrees. Unit was heating upon departure.
Brayden W.
Brayden W.
Arrived on site for heating maintenance on 2023 Trane Heatpump. Customer stated all was well with normal unit operation and had not turned on heat for the year. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Discussed Airscrubber previously discussed with homeowner. He declined at this time, but was still interested and stated h
Anna, TX 75409
Anna, TX - Arrived on site for heating maintenance on 2023 Trane Heatpump. Customer stated all was well with normal unit operation and had not turned on heat for the year.
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues 

Discussed Airscrubber previously discussed with homeowner. He declined at this time, but was still interested and stated h
Anna, TX - Arrived on site for heating maintenance on 2023 Trane Heatpump. Customer stated all was well with normal unit operation and had not turned on heat for the year.
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues 

Discussed Airscrubber previously discussed with homeowner. He declined at this time, but was still interested and stated h
Jacob P.
Jacob P.
Dryer Vent Cleaning, showed client before and after pictures of work done. Preformed single system heating maintenance on a 2021 heat pump. I tested all safeties and electrical components on the inside unit. All tested within manufacturer specifications. I tested temperature split home was being supplied with 110 degrees and return of 71 degrees. I left estimates for a chemical wash of the out door unit since we only rinsed it with water today. Unit was heating upon departure.
Anna, TX 75409
Anna, TX - Dryer Vent Cleaning, showed client before and after pictures of work done.

Preformed single system heating maintenance on a 2021 heat pump. I tested all safeties and electrical components on the inside unit. All tested within manufacturer specifications. I tested temperature split home was being supplied with 110 degrees and return of 71 degrees. I left estimates for a chemical wash of the out door unit since we only rinsed it with water today. Unit was heating upon departure.
Anna, TX - Dryer Vent Cleaning, showed client before and after pictures of work done.

Preformed single system heating maintenance on a 2021 heat pump. I tested all safeties and electrical components on the inside unit. All tested within manufacturer specifications. I tested temperature split home was being supplied with 110 degrees and return of 71 degrees. I left estimates for a chemical wash of the out door unit since we only rinsed it with water today. Unit was heating upon departure.
Shelby S.
Shelby S.
I performed a single heating maintenance on a 2018 heat pump system. I checked amps, capacitor, filter, drains, electrical, cleanliness, and rinsed the outdoor unit. During my thorough evaluation, I notice the system has growth on the blower wheel, he evaporator coil has build up in the fins, the ducts has a noticeable amount of dust present, and the outdoor unit is not safe form lightning strikes/power surges, duct to the office area is a 4”. I presented options to address the issues that were noticed. Customer would like time to discuss with significant other. I emailed all options and included an additional one that gave the biggest discount possible.
Anna, TX 75409
Anna, TX - I performed a single heating maintenance on a 2018 heat pump system.
I checked amps, capacitor, filter, drains, electrical, cleanliness, and rinsed the outdoor unit. During my thorough evaluation, I notice the system has growth on the blower wheel, he evaporator coil has build up in the fins, the ducts has a noticeable amount of dust present, and the outdoor unit is not safe form lightning strikes/power surges, duct to the office area is a 4”. I presented options to address the issues that were noticed. Customer would like time to discuss with significant other. I emailed all options and included an additional one that gave the biggest discount possible.
Anna, TX - I performed a single heating maintenance on a 2018 heat pump system.
I checked amps, capacitor, filter, drains, electrical, cleanliness, and rinsed the outdoor unit. During my thorough evaluation, I notice the system has growth on the blower wheel, he evaporator coil has build up in the fins, the ducts has a noticeable amount of dust present, and the outdoor unit is not safe form lightning strikes/power surges, duct to the office area is a 4”. I presented options to address the issues that were noticed. Customer would like time to discuss with significant other. I emailed all options and included an additional one that gave the biggest discount possible.

Your High Efficiency

Experts