Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in October 2025.

The most recent job was on October 29, 2025.

Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Jacob P.
Jacob P.
I returned to our clients home to evaluate the duct work for the newly installed 2.5 ton unit it. Previously the unit only had a single Return duct in the all way and te bedroom returns vents were still connected to the large main up-flow 5 ton unit. They made changes to the orientation no the bedroom returns and connected them properly to the correct system. This allows for proper airflow and better comfort in the master bedroom and the other bedrooms. The large 5 ton up-flow unit was moved also to allow for proper clearance for the air filter. The air filter was damaged and the prospective homeowner elected to leave the filter in place. The cabinet door for the cased coil was also secured with set screws and some tape. The larger unit does also have 2 “jump returns” in the hallway where the return vents for the “wine room” and “formal dining room” are connected to the same vent space in the ceiling. I informed the prospective buyer that this is considered correct but it again presen
Anna, TX 75409
Anna, TX - I returned to our clients home to evaluate the duct work for the newly installed 2.5 ton unit it. Previously the unit only had a single Return duct in the all way and te bedroom returns vents were still connected to the large main up-flow 5 ton unit. They made changes to the orientation no the bedroom returns and connected them properly to the correct system. This allows for proper airflow and better comfort in the master bedroom and the other bedrooms. 
The large 5 ton up-flow unit was moved also to allow for proper clearance for the air filter. The air filter was damaged and the prospective homeowner elected to leave the filter in place.
The cabinet door for the cased coil was also secured with set screws and some tape.
The larger unit does also have 2 “jump returns” in the hallway where the return vents for the “wine room” and “formal dining room” are connected to the same vent space in the ceiling. I informed the prospective buyer that this is considered correct but it again presen
Anna, TX - I returned to our clients home to evaluate the duct work for the newly installed 2.5 ton unit it. Previously the unit only had a single Return duct in the all way and te bedroom returns vents were still connected to the large main up-flow 5 ton unit. They made changes to the orientation no the bedroom returns and connected them properly to the correct system. This allows for proper airflow and better comfort in the master bedroom and the other bedrooms. 
The large 5 ton up-flow unit was moved also to allow for proper clearance for the air filter. The air filter was damaged and the prospective homeowner elected to leave the filter in place.
The cabinet door for the cased coil was also secured with set screws and some tape.
The larger unit does also have 2 “jump returns” in the hallway where the return vents for the “wine room” and “formal dining room” are connected to the same vent space in the ceiling. I informed the prospective buyer that this is considered correct but it again presen
Jacob P.
Jacob P.
Preformed single system heat maintenance on a straight electric air handler. I tested all electrical components. I found one of the heat strips on the heat kit to be low testing at 15 amps. The other legs were testing at 20amps which was within manufacturer specifications range. Temperature being supplied to the home for heating was at 103 degrees with a return of 74 degrees. Client did not have a filter to be changed at this time. I also noticed the unit did not have surge protection on either the inside unit or outside unit. Unit was heating upon departure.
Anna, TX 75409
Anna, TX - Preformed single system heat maintenance on a straight electric air handler. I tested all electrical components. I found one of the heat strips on the heat kit to be low testing at 15 amps. The other legs were testing at 20amps which was within manufacturer specifications range. Temperature being supplied to the home for heating was at 103 degrees with a return of 74 degrees. Client did not have a filter to be changed at this time. I also noticed the unit did not have surge protection on either the inside unit or outside unit. Unit was heating upon departure.
Anna, TX - Preformed single system heat maintenance on a straight electric air handler. I tested all electrical components. I found one of the heat strips on the heat kit to be low testing at 15 amps. The other legs were testing at 20amps which was within manufacturer specifications range. Temperature being supplied to the home for heating was at 103 degrees with a return of 74 degrees. Client did not have a filter to be changed at this time. I also noticed the unit did not have surge protection on either the inside unit or outside unit. Unit was heating upon departure.
Jacob P.
Jacob P.
spoke to customer over the phone and reset service reminder
Anna, TX 75409
Matthew C.
Matthew C.
Preformed dryer vent cleaning, presented before and after photos to client. Preformed two system heating maintenance on 2019 Goodman furnaces. I tested all electrical components and safeties inside the units. All electrical and safeties tested within manufacturer specifications. I inspected the duct work and blower wheels of each unit for over all cleanliness. I found both systems could benefit from having a the ducts and plenum boxes cleaned along with both blower wheels. Temperature being supplied to the home for the downstairs unit was 115 and 72 return and the upstairs was 117 and 70 return. Both units were cooling upon departure.
Anna, TX 75409
Anna, TX - Preformed dryer vent cleaning, presented before and after photos to client.

Preformed two system heating maintenance on 2019 Goodman furnaces. I tested all electrical components and safeties inside the units. All electrical and safeties tested within manufacturer specifications. I inspected the duct work and blower wheels of each unit for over all cleanliness. I found both systems could benefit from having a the ducts and plenum boxes cleaned along with both blower wheels. Temperature being supplied to the home for the downstairs unit was 115 and 72 return and the upstairs was 117 and 70 return. Both units were cooling upon departure.
Anna, TX - Preformed dryer vent cleaning, presented before and after photos to client.

Preformed two system heating maintenance on 2019 Goodman furnaces. I tested all electrical components and safeties inside the units. All electrical and safeties tested within manufacturer specifications. I inspected the duct work and blower wheels of each unit for over all cleanliness. I found both systems could benefit from having a the ducts and plenum boxes cleaned along with both blower wheels. Temperature being supplied to the home for the downstairs unit was 115 and 72 return and the upstairs was 117 and 70 return. Both units were cooling upon departure.
Shelby S.
Shelby S.
upon arrival, I found the outdoor unit in a lockout for start amps. I reset the outdoor control board. The system went through a short cycle timer and started up. I checked the start amps, and I had a reading of 100.00 amps. I gave the option of adding a hard start kit to the system and surge protection. I got approval to install the hard start kit. This brought the start amps from 100.00 down to 4.0. I provided evidence of the part being installed and the benefit of having it. I collected for the work provided today and system is cooling upon departure.
Anna, TX 75409
Anna, TX - upon arrival, I found the outdoor unit in a lockout for start amps. I reset the outdoor control board. The system went through a short cycle timer and started up. I checked the start amps, and I had a reading of 100.00 amps. I gave the option of adding a hard start kit to the system and surge protection. I got approval to install the hard start kit. This brought the start amps from 100.00 down to 4.0. I provided evidence of the part being installed and the benefit of having it. I collected for the work provided today and system is cooling upon departure.
Anna, TX - upon arrival, I found the outdoor unit in a lockout for start amps. I reset the outdoor control board. The system went through a short cycle timer and started up. I checked the start amps, and I had a reading of 100.00 amps. I gave the option of adding a hard start kit to the system and surge protection. I got approval to install the hard start kit. This brought the start amps from 100.00 down to 4.0. I provided evidence of the part being installed and the benefit of having it. I collected for the work provided today and system is cooling upon departure.
Brayden W.
Brayden W.
Arrived on site for QC visit on new install. Started inside at t-stat (American Standard) turned system down to check over unit. System is level all wiring is good no error codes. Getting over 20 degree temp split. Drain line is draining at this time and float switch is functioning properly. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. System in good working order upon departure. Thank you for your time.
Anna, TX 75409
Anna, TX - Arrived on site for QC visit on new install. Started inside at t-stat (American Standard) turned system down to check over unit. System is level all wiring is good no error codes. Getting over 20 degree temp split. Drain line is draining at this time and float switch is functioning properly. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. System in good working order upon departure. Thank you for your time.
Anna, TX - Arrived on site for QC visit on new install. Started inside at t-stat (American Standard) turned system down to check over unit. System is level all wiring is good no error codes. Getting over 20 degree temp split. Drain line is draining at this time and float switch is functioning properly. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. System in good working order upon departure. Thank you for your time.
Jesse V.
Jesse V.
Arrived on site for quality control visit on new install. Started inside at t-stat (American standard) turned system down to check over unit. System is level all wiring is good. Found error codes for temperature sensor. Spent some time resetting the temperature sensor, and error went away and sensors were communicating properly. Adjusted minimum cfm from 250 to 350. Measured over 20 degree temp split. Drain line is draining well at this time and float switch was operating as intended. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Tested normal heating operation. Notice a small amount of air leakage on supply plenum. I made sure to reseal this duct to ensure system health. System in good working order upon departure. Thank you for your time.
Anna, TX 75409
Anna, TX - Arrived on site for quality control visit on new install. Started inside at t-stat (American standard) turned system down to check over unit. System is level all wiring is good. Found error codes for temperature sensor. Spent some time resetting the temperature sensor, and error went away and sensors were communicating properly. Adjusted minimum cfm from 250 to 350. Measured over 20 degree temp split. Drain line is draining well at this time and float switch was operating as intended. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Tested normal heating operation. Notice a small amount of air leakage on supply plenum. I made sure to reseal this duct to ensure system health. System in good working order upon departure. Thank you for your time.
Anna, TX - Arrived on site for quality control visit on new install. Started inside at t-stat (American standard) turned system down to check over unit. System is level all wiring is good. Found error codes for temperature sensor. Spent some time resetting the temperature sensor, and error went away and sensors were communicating properly. Adjusted minimum cfm from 250 to 350. Measured over 20 degree temp split. Drain line is draining well at this time and float switch was operating as intended. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Tested normal heating operation. Notice a small amount of air leakage on supply plenum. I made sure to reseal this duct to ensure system health. System in good working order upon departure. Thank you for your time.
Shelby S.
Shelby S.
I performed a heating maintenance on 2 propane gas systems. I checked amps, filters, electrical, cleanliness, and safeties. I confirmed that the master bedroom had a clogged drain line. Customer approved the clearing and wanted a bottle of total-c. Drain is free flowing and without restriction upon departure. Spoke briefly about surge protection and insulation. Customer has whole-home surge protection and is not interested in insulation at this time.
Anna, TX 75409
Anna, TX - I performed a heating maintenance on 2 propane gas systems. I checked amps, filters, electrical, cleanliness, and safeties. I confirmed that the master bedroom had a clogged drain line. Customer approved the clearing and wanted a bottle of total-c. Drain is free flowing and without restriction upon departure. Spoke briefly about surge protection and insulation. Customer has whole-home surge protection and is not interested in insulation at this time.
Anna, TX - I performed a heating maintenance on 2 propane gas systems. I checked amps, filters, electrical, cleanliness, and safeties. I confirmed that the master bedroom had a clogged drain line. Customer approved the clearing and wanted a bottle of total-c. Drain is free flowing and without restriction upon departure. Spoke briefly about surge protection and insulation. Customer has whole-home surge protection and is not interested in insulation at this time.
Brayden W.
Brayden W.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange Also performed dryer vent cleaning and repair. Found dryer vent poking out of the roof too far not leaving enough clearance on the roof box. I was able to push the pipe back enough to allow for clearance and reseal the pipe. There was a large amount of water the pipe from the blockages. Unit in good working order upon depart
Anna, TX 75409
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Inspected drain lines and treated to prevent blockages 
15. Rinsed condenser unit to promote heat exchange

Also performed dryer vent cleaning and repair. Found dryer vent poking out of the roof too far not leaving enough clearance on the roof box. I was able to push the pipe back enough to allow for clearance and reseal the pipe. There was a large amount of water the pipe from the blockages. Unit in good working order upon depart
Anna, TX - 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Inspected drain lines and treated to prevent blockages 
15. Rinsed condenser unit to promote heat exchange

Also performed dryer vent cleaning and repair. Found dryer vent poking out of the roof too far not leaving enough clearance on the roof box. I was able to push the pipe back enough to allow for clearance and reseal the pipe. There was a large amount of water the pipe from the blockages. Unit in good working order upon depart
Jacob P.
Jacob P.
Arrived at our clients home to inspect the newly installed equipment. The builder added a 3 ton outdoor condenser and a 2.5 ton indoor evaporator coil with a 3 ton furnace. The unit is installed properly with a single 16” return duct and they added the new unit to supply air to all 4 bedrooms and the 3 full bathrooms of the home. I took a video of the duct work in the attic and showed this to Larry. What I found is that the new unit has adequate return air but it is not connected into any of the corresponding bedrooms, this single return is only returning air from the hallway and not from the master area at all. Is is also missing surrounding attic insulation around the return box. The existing bedroom returns are still connected to the larger 5 Ton Unit. I explained to Larry that even though the return air is enough for the size of the equipment it presents a “comfort” problem with uneven distribution and overall cycle of air. I also found the new attic unit to be without a water shut
Anna, TX 75409
Anna, TX - Arrived at our clients home to inspect the newly installed equipment. The builder added a 3 ton outdoor condenser and a 2.5 ton indoor evaporator coil with a 3 ton furnace. The unit is installed properly with a single 16” return duct and they added the new unit to supply air to all 4 bedrooms and the 3 full bathrooms of the home. I took a video of the duct work in the attic and showed this to Larry. What I found is that the new unit has adequate return air but it is not connected into any of the corresponding bedrooms, this single return is only returning air from the hallway and not from the master area at all. Is is also missing surrounding attic insulation around the return box.
The existing bedroom returns are still connected to the larger 5 Ton Unit. I explained to Larry that even though the return air is enough for the size of the equipment it presents a “comfort” problem with uneven distribution and overall cycle of air. I also found the new attic unit to be without a water shut
Anna, TX - Arrived at our clients home to inspect the newly installed equipment. The builder added a 3 ton outdoor condenser and a 2.5 ton indoor evaporator coil with a 3 ton furnace. The unit is installed properly with a single 16” return duct and they added the new unit to supply air to all 4 bedrooms and the 3 full bathrooms of the home. I took a video of the duct work in the attic and showed this to Larry. What I found is that the new unit has adequate return air but it is not connected into any of the corresponding bedrooms, this single return is only returning air from the hallway and not from the master area at all. Is is also missing surrounding attic insulation around the return box.
The existing bedroom returns are still connected to the larger 5 Ton Unit. I explained to Larry that even though the return air is enough for the size of the equipment it presents a “comfort” problem with uneven distribution and overall cycle of air. I also found the new attic unit to be without a water shut

Your High Efficiency

Experts