Menu

Heating and Air Conditioning Services in Anna, TX

Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.

Schedule Service in AnnaCall (903) 482-4900

HVAC Services in Anna, TX

Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:

AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.

AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.

Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.

Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.

Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.

Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.

HVAC Services for Anna’s Growing Neighborhoods

Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.

For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.

Why Anna Homeowners Choose Adon Complete

Schedule Service in AnnaCall (903) 482-4900

Frequently Asked Questions

Here are some answers to common questions we get about our Anna HVAC services.

How much does AC repair cost in Anna, TX?

Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Anna?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.

What HVAC brands do you service in Anna?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.

Do you offer HVAC maintenance plans in Anna?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.

What areas near Anna do you serve?

We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.

Schedule HVAC Service in Anna Today

We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in AnnaCall (903) 482-4900

Recent Jobs and Reviews in Anna, TX

Rated 4.9 out of 5 stars based on 67 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Anna, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in October 2025.

The most recent job was on October 20, 2025.

Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.

Job Locations

Brayden W.
Brayden W.
Arrived on site, homeowner stated all was well with regards to normal unit operation. Performed dryer vent cleaning and showed homeowner pictures and videos of finished work. Performed heat maintenance on 2018 Armstrong furnace. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. Replaced by homeowner recently. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected igniter and flame sensors 15. Measured inducer motor amp and tested pressure sensor All was well with normal operation of furnace. Unit in good working order up
Anna, TX 75409
Anna, TX - Arrived on site, homeowner stated all was well with regards to normal unit operation. Performed dryer vent cleaning and showed homeowner pictures  and videos of finished work. Performed heat maintenance on 2018 Armstrong furnace. 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter. Replaced by homeowner recently.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Inspected igniter and flame sensors
15. Measured inducer motor amp and tested pressure sensor

All was well with normal operation of furnace. Unit in good working order up
Anna, TX - Arrived on site, homeowner stated all was well with regards to normal unit operation. Performed dryer vent cleaning and showed homeowner pictures  and videos of finished work. Performed heat maintenance on 2018 Armstrong furnace. 
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter. Replaced by homeowner recently.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Inspected igniter and flame sensors
15. Measured inducer motor amp and tested pressure sensor

All was well with normal operation of furnace. Unit in good working order up
Matthew C.
Matthew C.
Preformed heat maintenance. We tested all electrical components on the air handler. We noticed the heat strips were not coming on. Upon further inspection we noticed the heat kit was missing two wires. We wired them to the heat kit correctly and now all electrical components were testing within manufacturer specifications. We proceeded outside to check the outside unit compressor and fan start amps and electrical components. All tested within manufacturer specifications. Unit was cooling upon departure.
Anna, TX 75409
Anna, TX - Preformed heat maintenance. We tested all electrical components on the air handler. We noticed the heat strips were not coming on. Upon further inspection we noticed the heat kit was missing two wires. We wired them to the heat kit correctly and now all electrical components were testing within manufacturer specifications. We proceeded outside to check the outside unit compressor and fan start amps and electrical components. All tested within manufacturer specifications. Unit was cooling upon departure.
Anna, TX - Preformed heat maintenance. We tested all electrical components on the air handler. We noticed the heat strips were not coming on. Upon further inspection we noticed the heat kit was missing two wires. We wired them to the heat kit correctly and now all electrical components were testing within manufacturer specifications. We proceeded outside to check the outside unit compressor and fan start amps and electrical components. All tested within manufacturer specifications. Unit was cooling upon departure.
Jesse V.
Jesse V.
estimates at office for new construction
Anna, TX 75409
Matthew C.
Matthew C.
Returned to clients home to preform replacement of their gas valve in the attic furnace. Completed work and presented client with before and after photos. Client was satisfied with work preformed. Tested unit to insure everything g was in working order. Client wanted to have an estimate built to relocate his supply in his master bathroom toilet room to his master bedroom closet. Provided estimate for relocation of supply. Unit was cooling upon departure
Anna, TX 75409
Anna, TX - Returned to clients home to preform replacement of their gas valve in the attic furnace. 

Completed work and presented client with before and after photos. Client was satisfied with work preformed. Tested unit to insure everything g was in working order.

Client wanted to have an estimate built to relocate his supply in his master bathroom toilet room to his master bedroom closet. Provided estimate for relocation of supply.

Unit was cooling upon departure
Anna, TX - Returned to clients home to preform replacement of their gas valve in the attic furnace. 

Completed work and presented client with before and after photos. Client was satisfied with work preformed. Tested unit to insure everything g was in working order.

Client wanted to have an estimate built to relocate his supply in his master bathroom toilet room to his master bedroom closet. Provided estimate for relocation of supply.

Unit was cooling upon departure
Matthew C.
Matthew C.
Preformed heating maintenance on 2 systems Goodman gas furnaces. I tested all electrical components on the inside units. All tested within manufacturer specifications. All safeties tested within manufacturer specifications on both units. I noticed on the downstairs blower and return plenum and duct work there were heavy dust build up on both. I also noticed the units did not have surge protection. After running my air advice report I found that the home could benefit on installing an air scrubber on the downstairs unit. I provided estimates for duct cleaning level 2(downstairs unit), air scrubber, full system surge protection on both units and a blower wheel cleaning( downstairs unit). Systems were cooling upon departure.
Anna, TX 75409
Anna, TX - Preformed heating maintenance on 2 systems Goodman gas furnaces. I tested all electrical components on the inside units. All tested within manufacturer specifications. All safeties tested within manufacturer specifications on both units. I noticed on the downstairs blower and return plenum and duct work there were heavy dust build up on both. I also noticed the units did not have surge protection. After running my air advice report I found that the home could benefit on installing an air scrubber on the downstairs unit. I provided estimates for duct cleaning level 2(downstairs unit), air scrubber, full system surge protection on both units and a blower wheel cleaning( downstairs unit). Systems were cooling upon departure.
Anna, TX - Preformed heating maintenance on 2 systems Goodman gas furnaces. I tested all electrical components on the inside units. All tested within manufacturer specifications. All safeties tested within manufacturer specifications on both units. I noticed on the downstairs blower and return plenum and duct work there were heavy dust build up on both. I also noticed the units did not have surge protection. After running my air advice report I found that the home could benefit on installing an air scrubber on the downstairs unit. I provided estimates for duct cleaning level 2(downstairs unit), air scrubber, full system surge protection on both units and a blower wheel cleaning( downstairs unit). Systems were cooling upon departure.
Matthew C.
Matthew C.
Performed 2 system maintenance on gas systems. On the down stairs unit all electrical components and safeties test within manufacturer specifications. The blower wheel was having dust/debris build up. The upstairs unit we tested all electrical components and safeties. All safeties tested within manufacturer specifications. We all components beside the gas valve tested within manufacturer specifications. We found a gas leak at the gas valve. Also the blower wheel for the upstairs unit has dust/debris build up on it. We noticed the units did not have surge protection. We offered full system surge protection, new gas vale and blower wheel cleanings for the upstairs and downstairs units. Client elected to have the gas valve changed out. Client is having full home surge protection installed later this year and wasn’t interested in the hvac surge protection. Client also stated that he would like to hold off on the blower wheel cleanings until the spring. Units were cooling upon departure.
Anna, TX 75409
Anna, TX - Performed 2 system maintenance on gas systems. On the down stairs unit all electrical components and safeties test within manufacturer specifications. The blower wheel was having dust/debris build up.
The upstairs unit we tested all electrical components and safeties. All safeties tested within manufacturer specifications. We all components beside the gas valve tested within manufacturer specifications. We found a gas leak at the gas valve. Also the blower wheel for the upstairs unit has dust/debris build up on it. We noticed the units did not have surge protection. We offered full system surge protection, new gas vale and blower wheel cleanings for the upstairs and downstairs units. Client elected to have the gas valve changed out. Client is having full home surge protection installed later this year and wasn’t interested in the hvac surge protection. Client also stated that he would like to hold off on the blower wheel cleanings until the spring. Units were cooling upon departure.
Anna, TX - Performed 2 system maintenance on gas systems. On the down stairs unit all electrical components and safeties test within manufacturer specifications. The blower wheel was having dust/debris build up.
The upstairs unit we tested all electrical components and safeties. All safeties tested within manufacturer specifications. We all components beside the gas valve tested within manufacturer specifications. We found a gas leak at the gas valve. Also the blower wheel for the upstairs unit has dust/debris build up on it. We noticed the units did not have surge protection. We offered full system surge protection, new gas vale and blower wheel cleanings for the upstairs and downstairs units. Client elected to have the gas valve changed out. Client is having full home surge protection installed later this year and wasn’t interested in the hvac surge protection. Client also stated that he would like to hold off on the blower wheel cleanings until the spring. Units were cooling upon departure.
Jacob P.
Jacob P.
I arrived at our clients home for a single system replacement estimate. Our client has a grounded compressor outside of manufacturer warranty. We discussed how he would need to replace the full system to match to for efficiency and due to the refrigerant being phased out. We discussed the different types of equipment and he requested estimated for 2 stage and variable speed equipment. I proceeded into the attic and evaluated adding additional return air and air purification with the equipment. We agreed on a space to add return air to help the equipment breathe and overall comfort of the home. I created 2 estimated and discussed them with the Bennett’s. They are looking to replace the equipment the first of the year. I will also include attic insulation on a finalized estimate at that time. They are aware that our estimate is only good for 30 days.
Anna, TX 75409
Anna, TX - I arrived at our clients home for a single system replacement estimate. Our client has a grounded compressor outside of manufacturer warranty. We discussed how he would need to replace the full system to match to for efficiency and due to the refrigerant being phased out. We discussed the different types of equipment and he requested estimated for 2 stage and variable speed equipment.
I proceeded into the attic and evaluated adding additional return air and air purification with the equipment. We agreed on a space to add return air to help the equipment breathe and overall comfort of the home. I created 2 estimated and discussed them with the Bennett’s. They are looking to replace the equipment the first of the year. I will also include attic insulation on a finalized estimate at that time. They are aware that our estimate is only good for 30 days.
Anna, TX - I arrived at our clients home for a single system replacement estimate. Our client has a grounded compressor outside of manufacturer warranty. We discussed how he would need to replace the full system to match to for efficiency and due to the refrigerant being phased out. We discussed the different types of equipment and he requested estimated for 2 stage and variable speed equipment.
I proceeded into the attic and evaluated adding additional return air and air purification with the equipment. We agreed on a space to add return air to help the equipment breathe and overall comfort of the home. I created 2 estimated and discussed them with the Bennett’s. They are looking to replace the equipment the first of the year. I will also include attic insulation on a finalized estimate at that time. They are aware that our estimate is only good for 30 days.
Shelby S.
Shelby S.
Upon arrival, I found no immediate signs of a noise nor what system I should be diagnosing. After some general checks, I was able to determine that the downstairs unit is the one causing the noises. I began diagnosing and found the system is running on a lower than normal suction pressure. The filters on both systems are severely dirty. This is suffocating the units. The downstairs is in a worse state than the upstairs unit. It is currently freezing the evaporator coil. While checking the downstairs indoor unit, I came across the variable speed blower motor not revving up or down in response to static pressure change. This is likely due to a damaged ecm module because of the dirty filter. The capacitor on the downstairs outdoor unit tested 29/45. This is critically low. Both of the outdoor units are in need of cleaning and contactors. I gave the customer options to address these issues and he declined at the time of service. I emailed the options to the supplied email.
Anna, TX 75409
Anna, TX - Upon arrival, I found no immediate signs of a noise nor what system I should be diagnosing. After some general checks, I was able to determine that the downstairs unit is the one causing the noises. I began diagnosing and found the system is running on a lower than normal suction pressure. The filters on both systems are severely dirty. This is suffocating the units. The downstairs is in a worse state than the upstairs unit. It is currently freezing the evaporator coil. While checking the downstairs indoor unit, I came across the variable speed blower motor not revving up or down in response to static pressure change. This is likely due to a damaged ecm module because of the dirty filter. The capacitor on the downstairs outdoor unit tested 29/45. This is critically low. Both of the outdoor units are in need of cleaning and contactors. I gave the customer options to address these issues and he declined at the time of service. I emailed the options to the supplied email.
Anna, TX - Upon arrival, I found no immediate signs of a noise nor what system I should be diagnosing. After some general checks, I was able to determine that the downstairs unit is the one causing the noises. I began diagnosing and found the system is running on a lower than normal suction pressure. The filters on both systems are severely dirty. This is suffocating the units. The downstairs is in a worse state than the upstairs unit. It is currently freezing the evaporator coil. While checking the downstairs indoor unit, I came across the variable speed blower motor not revving up or down in response to static pressure change. This is likely due to a damaged ecm module because of the dirty filter. The capacitor on the downstairs outdoor unit tested 29/45. This is critically low. Both of the outdoor units are in need of cleaning and contactors. I gave the customer options to address these issues and he declined at the time of service. I emailed the options to the supplied email.
Jacob P.
Jacob P.
This estimate is to add the Leak sealant first and add additional refrigerant as needed. If the system only requires less than 3 pounds, we will not charge the client for refrigerant not used. As a reminder there is no warranty nor guarantee on the leak seal or the refrigerant used. This is due to the unknown future demand put onto the equipment. If the equipment needs to work harder, it may stress the components and cause the existing leak to become bigger. Leak seal can often times last for as long as a year or more, depending on overall usage of the equipment. Returned to the property to inject the leak sealant and adding additional refrigerant to the system. The system took 2 lbs 13oz just under the estimated 3lbs. After injecting the leak sealant and letting the unit run I discussed with the tenant the importance of replacing the filter regularly and also how to properly set and use the thermostat. She did provide a filter to be installed today. The unit is cooling properly on de
Anna, TX 75409
Anna, TX - This estimate is to add the Leak sealant first and add additional refrigerant as needed. If the system only requires less than 3 pounds, we will not charge the client for refrigerant not used.
As a reminder there is no warranty nor guarantee on the leak seal or the refrigerant used. This is due to the unknown future demand put onto the equipment. If the equipment needs to work harder, it may stress the components and cause the existing leak to become bigger.
Leak seal can often times last for as long as a year or more, depending on overall usage of the equipment.

Returned to the property to inject the leak sealant and adding additional refrigerant to the system. The system took 2 lbs 13oz just under the estimated 3lbs. After injecting the leak sealant and letting the unit run I discussed with the tenant the importance of replacing the filter regularly and also how to properly set and use the thermostat.
She did provide a filter to be installed today. The unit is cooling properly on de
Anna, TX - This estimate is to add the Leak sealant first and add additional refrigerant as needed. If the system only requires less than 3 pounds, we will not charge the client for refrigerant not used.
As a reminder there is no warranty nor guarantee on the leak seal or the refrigerant used. This is due to the unknown future demand put onto the equipment. If the equipment needs to work harder, it may stress the components and cause the existing leak to become bigger.
Leak seal can often times last for as long as a year or more, depending on overall usage of the equipment.

Returned to the property to inject the leak sealant and adding additional refrigerant to the system. The system took 2 lbs 13oz just under the estimated 3lbs. After injecting the leak sealant and letting the unit run I discussed with the tenant the importance of replacing the filter regularly and also how to properly set and use the thermostat.
She did provide a filter to be installed today. The unit is cooling properly on de
Shelby S.
Shelby S.
Preformed heating maintenance on a single system heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. We did notice that the unit has growth forming in the evaporator pan and blower wiring. We are recommending a uv light and air scrubber to be installed. We proceeded to the outside unit to test all electrical components. All electrical components tested within manufacturer specifications. The start and run amps for he compressor and fan motors were testing within manufacturer specifications. We noticed the unit does not have surge protection. We are recommending two surge protectors for the inside and outside units. Unit was cooling upon departure.
Anna, TX 75409
Anna, TX - Preformed heating maintenance on a single system heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. We did notice that the unit has growth forming in the evaporator pan and blower wiring. We are recommending a uv light and air scrubber to be installed. We proceeded to the outside unit to test all electrical components. All electrical components tested within manufacturer specifications. The start and run amps for he compressor and fan motors were testing within manufacturer specifications. We noticed the unit does not have surge protection. We are recommending two surge protectors for the inside and outside units. Unit was cooling upon departure.
Anna, TX - Preformed heating maintenance on a single system heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. We did notice that the unit has growth forming in the evaporator pan and blower wiring. We are recommending a uv light and air scrubber to be installed. We proceeded to the outside unit to test all electrical components. All electrical components tested within manufacturer specifications. The start and run amps for he compressor and fan motors were testing within manufacturer specifications. We noticed the unit does not have surge protection. We are recommending two surge protectors for the inside and outside units. Unit was cooling upon departure.

Your High Efficiency

Experts