Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in October 2025.
The most recent job was on October 9, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Performed heating check up 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Inspected flame sensor and igniter 6. Tested pressure switches and various safeties for functionality 7. Tested normal operation of burners 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked inducer motor amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser coil as it was blocked up with dust and debris. Advised outdoor coil cleaning. Homeowner elected to wait until spring to get this done. Further advised homeowner that this should be done as soon as possible to prolong life of system and improve efficiency. Unit in good working order upon departure
Performed heating check up 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Inspected flame sensor and igniter 6. Tested pressure switches and various safeties for functionality 7. Tested normal operation of burners 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked inducer motor amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Replaced return filter 16. Tested capacitor and contactor. Found both to be testing close to out of range, but both are within range at this time. Contactor contacts look good. Will continue to monitor. Homeowner signed up for maintenance. Unit in good working order upon departure
Preformed heating maintenance for a single system heat pump. I began by setting up our air advice machine to test the air quality of the clients home. While that was running i proceeded to the closet unit and tested all electrical components along with cleanliness of the unit. I found all the heat strips and electrical components to be testing within manufacturer specifications. Temperature being supplied to the home was at 113 degrees with a return air of 69 degrees. I then proceeded outside to test all electrical components on the outside unit. I tested run and start amps of the compressor and fan motors. They tested with manufacturer specifications. I did notice the unit doesn’t not have surge protection on it to help prevent any possible damage to the unit in the case of a power surge. I provided estimates for a surge protector to be added to the outside unit also I left estimates for an air scrubber and uv stick. Unit was cooling upon departure.
I performed a safety check on the heating cycle of a 2013 straight cool system. I noticed that the airhandler is full of growth. The blower has heavy rusting on the wheel and the inside of the blower housing. This is likely due to the blower being upsized and yanking water off of the evaporator coil. I checked the amp valve of the 15kw heat kit. They are testing in range at this time, but they are showing signs of becoming brittle. I went ahead and checked the start amps of the compressor, and the unit could use a hard start kit. The system does not have protection from surges at this time. I provided pricing for these areas of concern. Also, I mentioned upgrading equipment is possibly in the near future. I spoke about turning the unit into a heat pump. This would majorly reduce the electrical bill during the winter time, but new conductor wires would need to be ran for the thermostat and heat pump.
Preformed heating maintenance on single system gas. Tested all electrical components and gas valve. All electrical tested within manufacturer specifications. We did find the gas valve to have small gas leak at the burners. We spoke about adding dampers since they do have an issue with a hot spot in one room. We left estimates for air scrubber, warranty gas valve and adding 10 dampers. Cooling upon departure.
I installed the replacement condenser fan motor. The system is performing properly and back to cooling. I went ahead and performed the cooling maintenance on the system, also. Customer requested pricing for duct cleaning. I showed the customer the inside of the airhandler and spoke about other cleanings. I generated estimates for duct cleaning, blower cleaning, evaporator cleaning, and u/v light to prevent growth. The complete IAQ bundle includes all cleanings and u/v stick. The price for the evaporator coil cleaning/blower cleaning is if the customer elects to move forward with level 2 duct cleaning or lower.
Heat preventative maintenance on 3 heat pumps (downstairs, upstairs, and master bedroom) and 2 straight electric systems (both guest houses). Customer stated his electric bills are high but he knows that the little attic insulation he has in the main house is what’s contributing to them being high, he does have an attic insulation guy coming later today to give him an estimate because he didn’t know we did attic insulation but he will like an estimate from us so he can compare and gives us a chance to be competitive with the other company. During the inspection we checked all the electrical components and connections, heat kits, changed air filters with ones customer provided, inspected the systems for dirt buildup because the house has been under remodeling, and tested the overall performance of the systems. Master bedroom and upstairs system have the most dirt buildup in the ductwork and inside the system itself and the downstairs and mother in laws house has some dirt buildup in t
Preformed heating maintenance on 2024 American standard heat pump. Tested all electrical components on the inside unit. All tested within manufacturer specifications. Temperature being supplied when heating is 99 degrees, return air was 68 degrees. I changed the filter for client. 20x20x1. I proceeded outside to check and test all electrical components. All electrical components tested within manufacturer specifications range. I did notice that the client does not have surge protection on the unit. I spoke with him and he stated he wanted to think about it unit we came back for our spring visit. I addressed the issue with the drain line blocking the filter box from being opened. I rebuilt the drain line and moved the ptrap down to allow it to open. I also added a blow out valve for more convenience when having to unclog the main drain line. Unit was cooling upon departure
Upon arrival, we found that the condenser fan motor was locked up. We used a piece of metal to push the fan blades. (View video). I was building options for after market and factory motors. I discovered that the after market motor is too long and is not compatible with the system’s design even if the shaft was cut down. Customer approved factory motor replacement with membership. I waved the dispatch with the approval of the membership. I collected 400.00 deposit
Scheduled duct cleaning for Tuesday 8-10. Performed blower wheel cleaning and dryer vent cleaning. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested inducer motor 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected flame sensor and igniter as well as flame safety sensors 15. Rinsed condenser unit to promote heat exchange 16. Replaced and dated filters Unit in good working order upon departure. $350 for dryer vent cleaning and deposit on duct cleaning.

