Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in August 2025.
The most recent job was on August 11, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Upon arrival, I found the system is low on R410a. Customer informed me of the history of the outdoor unit. This unit has had 3 leaks repairs. I located the leak in the outdoor unit using fluorescent soap bubbles. I checked warranty on the outdoor unit. The warranty expired in 2023. I presented options to repair the leak with torches, repair the leak and add leak seal, and system replacement. Customer did not decide on a repair at the time of service.
Preformed cooling maintenance on single system. Tested all electrical components on the inside unit. All tested within manufacturer specifications. Temperature split across the coil was 17 degrees. I replaced the filter for the client. 20x25x2. I flushed and treated the drain line with total c. I proceeded to the outside unit where I tested all the electrical components, run and start amps for the compressor and fan motors. I found that the capacitor was failing and below manufacturer specifications. It was reading 32.8/45 +/-6percent. The run amps for the compressor and fan were testing within manufacturer specifications. On start up the compressor is testing outside of manufacturer specifications range at over 100 amps. Its rated at 77 amps on start up. I provided estimates for new capacitor and hard start kit. Unit was cooling upon departure.
Demand call for gas system from 2017 not cooling properly. Upon arrival the customer showed me the thermostat, attic access, and where the condenser outside was. She said she had her son change the air filter a few months back and the system doesn’t drop below 74. During my inspection I found that the system had 3 1in filters (20*25*1) each being a merv 14 and had been in the system since March. Customer did provide me a filter to replace today (20*25*4) I informed the customer that she had 3 filters in the system and that the system was suffocating from lack of air flow. After replacing the air filter and letting the system run for about 20 minutes I checked temperatures and pressures. Air intake was at 75 degrees and supply air was 59 degrees. When checking pressures I did find the system to be low on refrigerant and barely staying above freezing temperatures. I showed my findings to the customer and had the conversation of bandaid repair vs a permanent repair. Customer stated t
Demand call for heat pump zone system from 2018 not cooling. Upon arrival the customer showed me the equipment and attic access. He said he can feel the air coming out of the vents but not cool. He did replace his air filter (20*25*4). During my inspection I turned both thermostats on to cool, I did hear the blower kick on but when I went outside to go check the outside system I found it to not be running. I got the customer involved by sending him a video of it not running and investigating further into the system to see why it’s not running. I found the outdoor coil, indoor coil, blower wheel, and ductwork to be extremely dirty along with the contactor to be burning and arcing. I showed the customer my findings and gave him options on what we can do to get him cooling and efficiently. Customer decided to get a full system cleaning and replace the contactor. I washed the coil with chemicals and replaced the bad contactor, the full system cleaning we will contact the customer Monda
Preformed cooling maintenance on single system carrier heat pump 2020. Tested all electrical components on the inside unit. All tested within manufacturer specifications. I did find there to be a little build up on the evaporator coil. Temperature across the inside coil was at 18 degrees. 57 supply temperature and 75 degrees return temp. I treated drain line with total c. Filter did not need to be replaced at this time. 20x25x4. I proceeded to the outside unit , where I tested all electrical components all tested within manufacturer specifications. I tested run and start amps of the compressor motor. The start amps were testing outside of manufacturer range at over 100amps. The rating for the compressor to start up is 75 amps. Run amps tested within manufacturer range. The fan motor outside tested within manufacturer ranges. I rinsed the out door coil. Unit was cooling upon departure. Provided estimates for no rinse evaporator coil cleaning and hard start kit. CLEAN HORIZONTAL COIL &
I replaced the zone board kit. I tested the zones to ensure they would close and that the system would shut off. The system is working properly. I spoke with the home owner about surge protection. We determined that a whole home surge protector would properly fit her needs. Scope of Work: - Install Clean Comfort zone control board under manufacturer parts warranty. - Includes removal of the failed board, installation of the new board, wiring connections, and system testing to ensure proper zoning function. Customer Responsibility: - While the part is covered under warranty, labor is not included and will be billed separately. Notes: - System zoning will be fully tested after installation to verify proper operation. - Any additional components or issues found during service will be quoted before proceeding.
Replace motor under warranty. 20 degree split measured. Unit in good working order upon departure.
-Contactor -Turbo Multi Use Capacitor - 5-2-1 Hard Start Kit Ac preventative maintenance on a gas zone system from 2024. Upon arrival customer stated he changed the air filter recently (20*25*4) he changes it every 3 months. He did request for us to close his fresh air damper because of the bad air quality it’s bringing into his home. During my inspection I checked temperature, electrical components and connections, washed the coil outside, and treated the drain line. I did find the compressor starting heavy which is causing his contactor to be burning and arcing along with damaging his capacitor. I brought my findings up to the customer and he decided to get the parts repaired today by doing the bundle package. After the repairs I checked the compressor amp draws and they were within range. The system is running and cooling at this time
Preformed cooling maintenance on single system. Tested all electrical components on the inside unit. All tested within manufacturer specifications. Temperature split across the coil was 55 degrees supply and 75 return. Filters did not need to be changed at this time. Treated drain lines of the with total c. Noticed the unit did not have a blow out valve or a safety float switch left estimates for client. We proceeded outside to check all electrical components along with run and start amps of the compressor and fan motors. Upon inspection we found that the Contactor was pitted and testing high at 19.5 ohms. We also notice the start amps of the compressor was starting out of manufacturer specifications range. 72 amps is max. It was reading over 100 ohms. We offered hard start kit and new Contactor. Client elected to have both installed. After installing the hard start kit the start amps of value was brought down to 34.48 amps. We rinsed outside coil. Unit was cooling upon departure. 5
Process warranty under parts for Manufacture.. Remove all refrigerant from system recovery tanks. Remove coil from system. Chemical flush on copper lines to remove non-condensibles. Install new evaporator coil Confirm system is tight and sealed on all welds. Pressurize system with nitrogen 300 pounds to verify no leaks. Wait for 30 minutes to see the system holds up on pressure for 30 minutes 300 pounds. Completion of leak check. Put a vacuum on the system to remove any moisture in air. Evacuate system under 500 µm. Completion of evacuating a system. Put refrigerant in the system before starting up. Start the system up. Run system for 20 minutes before Commissioning the system. Factory refrigerant charge the system to manufacture specs.

