Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in August 2025.
The most recent job was on August 7, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Arrived on site, customer stated ac stopped working yesterday and outdoor unit was running. Tested outdoor electrical and found no issue. Upon inspecting the indoor unit I found the blower motor was not running. Tested G-C and found the unit was calling for the fan. Tested power to the motor and found 120V to the motor. Tested resistance on the motor and found none. This indicates the motor has burned out and is no longer working. Unit is under warranty and Trane has the motor in stock. $100 dollar deposit collected and part ordered. Informed customer we would return today to replace the motor around 2-4. Shut unit off at outdoor breaker to prevent damage to system. Po w-Sara pen 1021 Order number:27137388
Scope of Work – HVAC System Replacement Project Location: Date: Existing Conditions • The current HVAC system consists of original 1996 R‑22 gas equipment. • There is no gas vent pipe or gas line currently connected to the furnace for heating. • After discussing options, the customer has requested no gas to be used in the building moving forward. • The existing indoor unit does not have adequate electrical power to operate a heat pump system. ⸻ Electrical Requirements (Customer Responsibility) • The customer will be responsible for upgrading the electrical service to the indoor unit. • Requirements: • 240V power supply. • Two (2) dedicated 60A circuits run with #6 wire to the indoor unit. • Upgrade of the electrical panel as necessary to meet these requirements. • These upgrades must be completed before the new heat pump system is installed and operational. ⸻ Proposed System We propose installing a 4-ton American Standard heat pump system. • This system will provide
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange 16. Replaced and dated filters Found failed hard start kit on older unit. Also found failing capacitor testing outside of manufacturer specs wired to older unit’s blower motor inside. Advised homeowner this could lead to system failure. Homeowner elected to let it be for now and monitor. Units in good working order upon depa
I arrived at our clients home for concerns of airflow, not being sufficient enough for one of the upstairs bedrooms. He took me to the bedroom and showed me the attic access. I first began by measuring the surface temperature for all 4 walls. The room does have 3 exterior walls. They all measured within a degree of each other. I then proceeded into the attic and inspected the duct work. The duct work had no kinks or restrictive bends that would impede airflow. I then went to the supply plenum box and began looking for dampers. The entire box did not have any manual dampers on it. I showed my findings to our client and we discussed 2 options of adding manual dampers and restricting airflow to other areas of the upstairs space. By doing this it would help push more air into the bedroom. The second option would be to add an additional supply run to the bedroom and add it closer to the window which is the largest heat gain in the room. While waiting to talk with his spouse I briefly
Upon arrival met property manager Stephen. He stated that the roofer said it was an emergency drain pan leaking. Upon inspection of the closet unit the drainage for the ac system goes into the plumbing pipes under ground and the secondary drain lines with goes into the hot water heater drain pan also plumbed under ground. Went into the attic to insure that the duct weren’t sweating or suction line wasn’t sweating and found that the exhaust pipe for water heater connected to the roof had water damage and was leaking into the attic. Unit was cooling upon departure.
Upon arrival, I found the compressor not starting. Due to the options presented to the customer during our last visit, this call is now classified as a no AC. I checked the compressor ohm values and starting amps. It was pulling extremely high amps. Once I got it started, I could proceed with testing. I checked refrigerant pressures and running amps. I found that the TXV is slammed shut not allow refrigerant to flow freely. This resulted in the compressor receiving irreversible damage. I checked warranty on the evaporator coil and the outdoor unit. The evaporator coil is still under warranty and the outdoor unit is not. I contacted the property management company to update them on my findings. To get the system going for now, I would need to install the hard start kit. In hopes of getting more time out of the system, I would need to install the hard start kit and replace the TXV. With the damage the compressor has sustained because of the failed TXV, I am offering the option to fully r
3 years of maintenance provided with equipment sale
Upon arrival, I found the equipment cooling without a call for cooling. I removed the thermostats and it continued to run. I rebooted the system and it did not fix the issue. I proceeded into the attic to find that the zone board is sending a constant voltage on Y without a call. I noticed that the lights on the zone board were flickering on and off, too. We need to order a new zone board and return to repair. The system is cooling, but will not stop. Due to the time of service, we will have to locate the part in the morning and reach back out with a timeline for repair.
Upon arrival client stated that she was unsure if the drain line was clogged and concerned that the emergency drain pan would over flow. I proceeded into the attic to find that the main drain line was clogged and causing the unit to flow into the emergency drain pan. Presented client with findings and explained that the main drain line is clogged and would need to be addressed. I advised the client that the emergency drain line was not clogged but could become clogged if nothing was addressed soon. Spoke to client about membership advantages. Client had me change her filter for the time being and would like to think over the estimates that were provided. Unit was cooling up departure.
I performed a single system cooling maintenance on a 2020 gas system. The system was not communicating or zoned. I checked amps, capacitor, filter, electrical, drains, cleanliness, and safeties. I noticed the capacitor is beginning to read weak on the compressor side 31/35. This could lead to system failure. The contactor has higher than normal ohms. Also, I presented an option to upgrade the current filter to an Aprilaire filter.

