Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in July 2025.
The most recent job was on July 31, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
I performed a single system cooling maintenance on a 2022 heat pump system. I checked amps, capacitor, filter, electrical, drains, and safeties. I noticed that the ducts are beginning to have build up form again. After talking with the customer, I decided to give an option for a back up water safety switch. This is due to the customer informing me about ceiling damage because the blow out valve got shut off. I found that the surge protector was not operational. This was a fault on our end because it was wired incorrectly. I contacted Jacob and he told me to replace it. The system is fully operational and cooling inside of manufacture specifications.
Provided courtesy call to homeowner confirm 8am appointment time and to verify address. Homeowner greeted me on front porch when I arrived and explained how he was concerned his system is noisy and not functioning properly. Asked homeowner to provide a demand call for cooling. Performed AC diagnostics. 4 1/2 year old Lennox Valid parts warranty until November of 2025 - 20x25x1 filter still good. - Condenser coils extremely dirty restricted affecting efficiency and putting strain on electrical components/motors. - Refrigerant charge reading is not within manufacturer specifications due to restriction on condenser coils. - Checked all electrical components and amp draws - Condenser fan motor amp draw is good but motor is struggling to pull air through condenser coil and is noisy. Potential failure of condenser fan motor imminent in near future. Leaving estimate for fan motor. - Compressor has high starting amps..recommend hard start kit - Contactor reading high ohms and charging at conta
TURBO200X MULTI USE CAPACITOR installed 70 - 97.5 MFD 370 - 440V SIMILAR TO A BATTERY, CAPACITORS HELP START MOTORS BY STORING CURRENT. A DAMAGED CAPACITOR CAN DAMAGE THE MOTOR IF NOT SERVICED. REGULAR MAINTENANCE IS ENCOURAGED.
Performed AC diagnostics Checked all electrical components, motors, capacitors, contactor, high and low voltage wiring. System started up fine and displaying normal refrigerant charge/pressures. During inspection compressor sustained intermittent internal valve failure affecting system performance. System has valid parts warranty. Compressor availability being determined. Estimate for warranty compressor replacement presented and emailed. Provided availability for installation date and time. Client wants to consult with owner of building to negotiate how it’s going to be paid for. Client will call office when they want to move forward.
I performed single system cooling maintenance. I checked amps, capacitor, filter, drains, electrical, and safeties. The system is having a poor temperature drop. I believe the system is low on refrigerant, but I did not have my gauges at the time of service. I priced performing a duct cleaning per request of the customer.
Upon arrival tenant stated that the unit was not cooling last night and around 4 am the unit came back on. Client advised the filter was extremely dirty and he had changed it. I proceeded upstairs to the unit in the closet and found no evidence of the float switch being tripped. Proceeded to the outside unit where I hooked up my gauges and was getting a high pressure reading of 505 psig, on the low side I was seeing around 121 psig. Units compressor is starting up out of manufacture specifications and running amps are right at 21/24 amps. Capacitor is beginning to fail as well. Called and spoke with property management repair team and they can not approve any repairs at this time. Estimates provided for compressor saver bundle, turbo200x capacitor and hard start kit. Unit is cooling upon departure.
Delivered window unit to tenant. Showed tenant how to operate. Unit cooling on departure
Upon arrival, I found that the compressor was grounded causing the breaker to trip. I confirmed that the unit was out of warranty and spoke with the homeowner. I took pictures and measurements of the access and equipment. The system is currently undersized. The home is 1352 sq ft with a 3ton system. The customer stated it wouldn’t keep up. I priced upsizing the unit to a 3.5 ton.
Matthew and I adjusted dampers with the CFM reader. We adjusted all the upstairs vents between 400 and 500 fpm. The downstairs kitchen was only getting 200fpm at the start, and it is getting right at 600fpm. The dinning room is connected to the kitchen and receiving 550fpm. The master bedroom is at 600fpm down from 800fpm. The master bathroom and closet are connected. With it being a smaller duct supplying both of those, I managed to balance them at 360fpm. The homeowner wasn’t available during the adjustments to confirm and approve. Minor adjustments may be needed once we receive feedback from the homeowner. Please allow 2 weeks of run time before feedback. SMALL DUCT SYSTEM WITH EASY ACCESS / CHARGE TO PRE TEST NOT INCLUDED TO ADJUST AIRFLOW FOR BETTER TEMPERATURE CONTROL IN SPECIFIC AREAS, WE NEED TO ADD METAL OR MANUAL DAMPERS. ADEQUATE ACCESS TO DUCTWORK IS REQUIRED.
Upon arrival, I found that the compressor was not starting due to a bad capacitor. I installed a new capacitor under parts and labor warranty. Also, I made the customer aware that his warranty is in jeopardy due to lack of maintenance.

