Adon Complete Air Conditioning and Heating is Anna’s local HVAC company. Most contractors serving this area are driving in from McKinney or further south. We’re not. Our office is right here in Anna. Our owner, Jesse Villarreal, has been serving Collin County homeowners for over 27 years, and our technicians run calls in Anna neighborhoods every single day. Whether you’re in an established neighborhood near downtown, a newer community like Liberty Hills, or getting ready to move into Sherley Farms, we know this city and we’re ready to help.
HVAC Services in Anna, TX
Anna is one of the fastest-growing cities in North Texas, and with thousands of new homes coming online, the demand for reliable heating and cooling service has never been higher. Here’s what we offer Anna homeowners:
AC Repair. Fast diagnosis and repair on all makes and models. We’re already in Anna every day, which means getting to you quickly isn’t a problem.
AC Installation. Whether you’re moving into a new build or replacing an aging system, we size every installation correctly using a proper load calculation. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Anna homeowners in new construction, getting on a maintenance plan early is one of the best ways to protect your warranty and catch issues before they become expensive.
Mini-Split Installation. Ductless systems work especially well for garages, home offices, bonus rooms, and additions, all of which are common in Anna’s newer construction neighborhoods.
Heat Pump Installation and Repair. Heat pumps provide year-round heating and cooling from one system. A popular option for Anna’s newer builds where energy efficiency matters.
Indoor Air Quality. New construction homes are built tight for energy efficiency, which means less fresh air circulation. Air filtration systems, UV purifiers, and ventilators help keep the air inside your home clean and healthy. We offer a free “What Are You Breathing?” screening to Anna homeowners.
Air Duct Cleaning. Construction dust and debris in ductwork is a real issue in new builds. Professional duct cleaning after move-in is something we recommend for most Anna homeowners in newer communities.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Anna and Collin County.
HVAC Services for Anna’s Growing Neighborhoods
Anna’s population grew roughly 177 percent between 2022 and 2023, making it one of the fastest-growing cities in the country. Sherley Farms, a $1.5 billion master-planned community, broke ground in March 2026 and will bring roughly 3,000 new homes to the city over the next several years. Liberty Hills is adding another 1,800 homes near US-75. That’s thousands of new HVAC systems coming online in a city that’s already one of our busiest service areas.
For homeowners in newer construction, the first few years matter most. Builder-installed systems need to be maintained on schedule to keep warranties valid, and new ductwork should be inspected and cleaned after construction is complete. We’ve helped Anna homeowners navigate all of this, and we know exactly what to look for.
Why Anna Homeowners Choose Adon Complete
- We live here. Our office is at 824 S Central Expressway in Anna. When you call us, you’re calling your neighbor, not a company routing calls from a regional office in Dallas.
- Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in every aspect of the business. That level of accountability is hard to find at a larger company.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained installation and the full manufacturer’s warranty on every system we install.
- We service everything. Whatever brand is in your home, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access.
Frequently Asked Questions
Here are some answers to common questions we get about our Anna HVAC services.
How much does AC repair cost in Anna, TX?
Most AC repairs in Anna run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement are on the lower end. More involved repairs, like a blower motor or evaporator coil, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Anna?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Anna and Collin County. Since we’re based in Anna, response times are typically faster here than anywhere else we serve.
What HVAC brands do you service in Anna?
We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise in those brands.
Do you offer HVAC maintenance plans in Anna?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. For new construction homeowners especially, staying on a maintenance schedule helps protect your builder warranty.
What areas near Anna do you serve?
We serve all of Anna and the surrounding Collin County communities, including McKinney, Sherman, Melissa, Van Alstyne, and Allen.
Schedule HVAC Service in Anna Today
We’re already in your neighborhood. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Anna, TX
Anna, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Anna, TX in May 2025.
The most recent job was on May 23, 2025.
Adon Complete Air Conditioning and Heating has completed 589 jobs in Anna, TX in the last 12 months. The first job there was in February 2020.
Job Locations
Upon arrival we spoke to Adam about water coming from his ceiling from the AirHandler. Client did mention that it had just started leaking through the ceiling over night. He did check the drain pan found water to be present and line appeared to be clogged. Upon inspection of the unit we found that the AirHandler had no safety switch or blowout valve. We offered the client an estimate to add the safety float switch and blow out valve. Client agreed to have modifications made to the drain lines. We did blow out the line with nitrogen. We proceeded to talk with the customer about dry wall repair company Dry Force 866-570-3254 client was provided with this information. As a courtesy we checked the electrical components on the outdoor condenser, we found the capacitor to be testing on the high side (45/5+-6%) at 42.68 for the compressor. Provided customer with estimate for a replacement capacitor and surge protector. Client decided to go with the replacement capacitor. He declined the surge
Performed single system cooling. The airhandler is 2018 and the heat pump is 2019. I checked amps, capacitor, filter, drains, electrical, temperature differential, and cleanliness. The system is cooling to manufacture specifications. I provided options to address growth that is forming inside of the airhandler, to protect the from water damage, and to upgrade the filtration. Customer wanted to wait on all options.
Arrived at our clients home for a single system cooling maintenance. Our clients have had no issues. I did ask regarding the recent smell and they said it started yesterday. We discussed air purification for the full system and home. They are interested in moving forward. We proceeded to the outdoor heat pump and tested all the electrical components. Everything passed inspection today and tested within manufacture specifications. We washed the outdoor coils as part of today’s maintenance service. We then went into the attic and tested the temperature drop for the unit. We measured a 19° drop. The blower wheel is still clean and the motor also passed today’s test. We used the TotalC product down the primary drain line to help prevent clogs and will schedule a return visit to install the air scrubber.
I found that the outdoor unit wasn’t turning on due to a high pressure lock out. The heat pump does not have a high pressure switch. It has a jumper where those wires should be. I reset the board and found that the contactor is shorted causing the outdoor unit to be in a constant cycle of 5min delay. A new contactor would get it cooling but I worry about the defrost board. The defrost board may need to be replaced, also.
Preformed Cooling maintenance. Tested capacitor, contactor, compressor start and run amps and tested out door fan motor run amps. Upon inspection we found that the contactor was testing with in range but on the higher side at 17 ohms, also it was burnt and rusted. We presented all of our findings to the client and offered to replace the contactor. Client went ahead with the repair. Client also brought up the concern of the master bedroom not getting cool enough. We presented the client with the solution of adding dampers to two of the duct runs leaving the master bedroom duct to receive more air flow. Added total-c to the main drain line. System was cooling upon departure.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Washed condenser unit to promote heat exchange Condenser coils are extremely dirty. Recommend to customer to have the. Cleaned in between maintainances in order to preserve these systems.
I arrived at our clients home for a 2 system cooling maintenance. I began outside by testing all the electrical components on both condenser units. I found the upstairs capacitor to be on the verge of failure reading low. This is subsequently causing the compressor to have high start amps close to the maximum limit. The contactor is also showing signs or arching/burning and should be considered for replacement. The down unit contactor is the only component showing signs of issues currently. I did wash both condenser units and showed these pictures to our client. We did discuss duct cleaning and air purification as well and I will be sending an estimate for both. Inside the attics for both units I found both units to not have water safety switches. The drain pans are in relatively decent condition with the downstairs unit showing the most signs of previous water backing up. The blower motors are testing within range and both units are cooling with 19/20° drop respectively. I spoke w
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Washed condenser unit to promote heat exchange All checks were within range and performing as intended.
Low subcool may need more refrigerant
Returned to complete work from estimate. Disassembled blower wheel and motor for cleaning, cleaned evaporator coil, replaced contactor and installed hard start it. Once work was completed we turn the system on to test it. Start amp dropped by 13amps. Showed pictures to client. Client is ready for the season. Unit cooling on departure.

