Frisco has grown faster than almost any city in America over the past two decades, and the homes here reflect it. Larger floor plans, multi-zone systems, high-efficiency equipment, and newer construction in neighborhoods like The Fields, Phillips Creek Ranch, and Viridian. Keeping all of it running well takes an HVAC company that knows what it’s doing. Adon Complete Air Conditioning and Heating has been running calls for HVAC service in Frisco for years from our home base in Anna, just up the Dallas North Tollway corridor. We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies.
What We Do for Frisco Homeowners
AC Repair. We diagnose and repair all makes and models. Frisco’s newer construction often means multi-zone systems and communicating equipment — our technicians know how to work on all of it.
AC Installation. When it’s time to replace, we size every system correctly using a proper load calculation. That matters especially in Frisco’s larger homes where an improperly sized system will short-cycle and leave rooms uncomfortable. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Frisco homeowners with high-end systems, staying on a maintenance schedule is one of the best ways to protect your investment.
Mini-Split Installation. Garages, home offices, casitas, and bonus spaces are common in Frisco’s larger homes. Mini-splits handle these spaces cleanly without touching your central system.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from one system and work well in North Texas’s climate. A practical choice for Frisco homeowners upgrading to a more efficient setup.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening. Frisco’s tight construction means less natural ventilation, making air quality systems more important than in older homes.
Air Duct Cleaning. Even newer ductwork accumulates contaminants over time. Professional duct cleaning improves air quality and keeps your system running efficiently throughout the home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. In a larger Frisco home, that adds up fast. We inspect, repair, and seal ductwork throughout the area.
Why Frisco Homeowners Choose Adon Complete
Frisco has no shortage of HVAC companies competing for business. Here’s why our customers keep calling us back.
We know multi-zone and communicating systems. The job notes from our Frisco calls show what we actually work on here – damper adjustments, multi-system diagnostics, communicating Trane equipment, humidity management in two-story homes. This isn’t routine work, and we handle it well.
Jesse Villarreal has over 27 years of experience. He’s the owner and is directly involved in how the business operates. When something goes wrong, you’re dealing with a company where the owner’s reputation is on the line.
We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. Factory-trained on the brands most common in Frisco’s newer construction. Full manufacturer warranty on every system we install.
The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. Straightforward and affordable.
Serving Frisco and Surrounding Collin County Communities
We serve all of Frisco, including The Fields, Phillips Creek Ranch, Viridian, Stonebriar, and the established neighborhoods along Preston Road and the Dallas North Tollway. We also serve the surrounding communities of Allen, McKinney, Anna, Melissa, and Sherman.
Frequently Asked Questions
Here are some common questions we get about our HVAC services in Frisco.
How much does AC repair cost in Frisco, TX?
Most AC repairs in Frisco run between $150 and $600 depending on the type of repair. Frisco’s newer homes often have multi-zone systems and higher-end equipment, which can affect parts costs. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you service multi-zone systems in Frisco?
Yes. Multi-zone systems and communicating HVAC equipment are common in Frisco’s larger homes, and our technicians work on them regularly. We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, and more.
Do you offer HVAC maintenance plans in Frisco?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. Preventive maintenance is especially important for the multi-system setups common in Frisco’s larger homes.
Do you offer emergency HVAC service in Frisco?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Frisco. When you call after hours, you reach a real person who can get a technician to your home fast.
What areas near Frisco do you serve?
We serve all of Frisco and the surrounding communities including Allen, McKinney, Anna, Melissa, and Sherman.
Ready to Get Your System Serviced?
Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online for HVAC services in Frisco. We handle everything from routine maintenance to emergency repairs throughout Frisco and Collin County.
Recent Jobs and Reviews in Frisco, TX
Frisco, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Frisco, TX between April 2025 and May 2025.
The most recent job was on May 13, 2025.
Adon Complete Air Conditioning and Heating has completed 51 jobs in Frisco, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Arrived on site, customer stated there were no issues with system operation. Checked breaker size and wire connections at the disconnect condenser and air handler. Tested drain line. Upon testing the float switch, it was found to not be working. No issues in heating switch to cooling. Measured 20° temperature split. Rewired float switch from ACC1 to EXT SW1 and programmed at thermostat. Float switch found to be in good working order.
I arrived at our clients home for a 2 system maintenance inspection. Our client had concerns about the downstairs unit shutting off a not cooling properly for a few days she said it later came back on and they also turned the upstairs unit on to cool the space. By the way Denise was describing the problem I initially thought it was the water safety switch engaging and shutting off power to the outdoor downstairs condenser. I proceeded int9 the attic and found no existing evidence or water in the drain line for the downstairs unit. Only water in the upstairs unit drain line. I confirmed that both primary drain lines for both units are plumber to 2 separate sinks in the upstairs unit drain restroom. I proceeded outside and tested the electrical components for both upstairs and downstairs units. I began with the upstairs unit and tested a bad capacitor. It is below manufacture specifications. I also found the contactor to be burnt and near complete failure. The upstairs unit has extremel
I arrived at our clients home for a 2 system maintenance inspection. Our client had recently replaced his air filters and did not need them changed today. I began outside by testing the electrical components for both outdoor units. Almost everything passed inspection today with exception of the upstairs capacitor and both units had very high start amps. Both units already have compressor savers attached. After washing the outdoor coils it did help reduce the start amps for the units. But this is also normal to see with units this age. I proceeded upstairs to the attic and checked the temps true split and blower motors for both units. Both indoor blower wheels have significant dust accumulated on them. We discussed cleaning blower wheels as well as replacing the capacitor but our client would like to monitor them at this time. Both units are have the exterior fan motor also working relatively hard according t9 manufacture specifications.
We arrived at our clients home for a two system cooling maintenance inspection. We began by first the bathroom exhaust vent that had a bird nest inside of it. This vent is on the right side of the home and we found three small baby birds. The vent hose is compromised as well as the exterior cap. We advised our client to reach out to pest control to have them remove the birds properly. We then proceeded to perform the maintenance on both outdoor heat pump units. Everything electronically tested within range. Except for the start amps on both compressors for both units. Both of them are reaching manufacturers limits. We discussed adding compressor savers to both outdoor units to help preserve and protect the compressors from over amping and failing completely. We also washed both outdoor coils as part of today’s maintenance. We then proceeded inside, the client did provide air filters to be replaced for both attic units. We did run our air advice today and will be sending the report to
I found the downstairs unit capacitor, and contactor to be failed. I showed this to our client and he elected to replace both of these components under warranty. downstairs system is running and cooling to manufacture specification.
Retuned to home due to misunderstanding. I immediately proceeded outside to test the electrical components for the upstairs AC. I immediately found a capacitor that had exploded inside the electrical cabinet of the outdoor unit. I showed this to our client and explained I could not test the system without replacing the components. And I was only authorized to do so by the homeowner. I proceeded to test the furnaces of both up and downstairs units because the inspector has Sami they were short cycling. Both furnaces came on and ran for 5-10 mins with 40° temperature rise. Mechanically they furnaces are working but with airflow restriction from the air filter it may have cause the short cycling seen by the home inspector.
I arrived for the downstairs unit not cooling according to the home inspector. I immediately proceeded outside and connected my gauges. Once connected I immediately identified that the reason the unit was not cooling is because it is completely empty of refrigerant. The unit is original to the home from 2008. The upstairs condenser is newer from 2020. I proceeded upstairs and found that the upstairs evaporator coil is also from 2020 but it is attached to the original furnace from 2008. The entire downstairs system is original from 2008. I found several other items that may or may not have been flagged from the inspection report. Including the gas line is without a sediment trap. No water shutoff switch in the downstairs system And evidence of rodents in the attic I spoke with both the buyer and agent regarding my findings. The downstairs unit, that is completely empty of Freon, needs to be completely replaced. It is rated to take R22 refrigerant that is considered obsolete. The
I arrived at our clients home for a two system cooling maintenance inspection. I began by replacing both air filters in the attic. I then proceeded outside to test and inspect the electrical components for both outdoor units. I found the downstairs unit capacitor, and contactor to be near failure. I showed this to our client and he elected to replace both of these components under warranty after the repair was completed The compressor start amps were still exceedingly high. I showed our client the advantage of having a hard start kit with the reduced amps. He declined to have this added to his unit at this time. I did wash both outdoor condensers as part of maintenance. Then proceeded upstairs to inspect the blower wheels for both attic units. Both Have dust accumulated on the wheels. I showed this to our client and he elected to monitor them at this time. Both units are cooling on departure.
Scope of Work: American Standard XR17 Single-Speed Air Conditioner (Heat Pump) Installation – 2025 SEER2 Compliant Equipment Details: • Outdoor Unit: American Standard XR17 (Model: ) – Heat Pump • Air Handler: American Standard with integrated heat kit • Thermostat: American Standard Wi-Fi Thermostat, compatible with the American Standard Home App • Capacity: 4 Ton • Compressor Type: American Standard Climatuff Single-Stage Speed Compressor ⸻ Included Warranties: Manufacturer Warranties: • Compressor: 10-Year Manufacturer Warranty • Parts: 10-Year mManufacturer Warranty • Pressure Warranty: 10-Year Warranty Labor Warranty: • 10-Year Labor Warranty through JB Warranty & Associates • Equipment Registration Handled by Adon CPS ⸻ Adon Care Club Maintenance Plan: • 1-Year Seasonal Maintenance: • Spring and Fall safety checks • Helps protect the manufacturer warranty • Prolongs the life of the cooling and heating system ⸻ Quality Control: • Post-Installation Quality C
Performed a 3 system ductwork cleaning ( gas ),,, all return plenums are very dirty, ductwork is very dusty,, blower motors are also dusty,,some return/ supply vents are high ( will need a tall ladder), highly recommended a duct cleaning on all systems .

