Menu

Heating and Air Conditioning Services in McKinney, TX

McKinney summers are long, and the heat is serious. When your AC stops working in July, you need someone who can actually show up the same day, not schedule you out a week. Adon Complete Air Conditioning and Heating has been serving McKinney homeowners for years from our home base in Anna, just up the road. Our owner, Jesse Villarreal, has over 27 years of HVAC experience, and our technicians, Shelby, Brayden, Matthew, and the rest of the team, are working in McKinney neighborhoods every single day. We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies.

Schedule ServiceCall (903) 482-4900

HVAC Services We Offer in McKinney

We handle everything heating and cooling for McKinney homeowners and businesses. Here’s what we do:

Why McKinney Homeowners Choose Adon Complete

There’s no shortage of HVAC companies serving McKinney. Here’s what makes us different.

We’re local. We’re based in Anna, TX, a few miles up Highway 75. Our technicians drive the roads of McKinney every day and know the neighborhoods, the housing stock, and the HVAC challenges that come with North Texas homes.

Jesse Villarreal has been doing this for over 27 years. He’s the owner and is actively involved in the business. When you call Adon Complete, you’re not calling a franchise or a call center. You’re calling a local company where the owner’s name and reputation are on the line with every job.

We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC company in McKinney can say that.

We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.

The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable maintenance plan in the area.

Serving All of McKinney

We service every neighborhood in McKinney, including Craig Ranch, Stonebridge Ranch, Adriatica, Tucker Hill, and Historic Downtown McKinney. Whether you’re in a newer construction home or an older property, we know the area well, and our technicians are out in McKinney neighborhoods every day.

Schedule Service in McKinneyCall (903) 482-4900

Frequently Asked Questions

How much does AC repair cost in McKinney, TX?

Most AC repairs in McKinney run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or a thermostat issue are on the lower end. More involved repairs, such as a refrigerant recharge or a blower motor replacement, will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in McKinney?

Yes. We offer 24/7 emergency heating and air conditioning service throughout McKinney and Collin County. When you call after hours, you reach a real person who can get a technician to your home fast. We know that a broken AC in McKinney during summer doesn’t wait for business hours.

What HVAC brands do you service in McKinney?

We service all makes and models, including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.

Do you offer HVAC maintenance plans in McKinney?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably year-round.

What areas of McKinney do you serve?

We serve all of McKinney and the surrounding Collin County communities, including Allen, Frisco, Melissa, Anna, Celina, and Prosper.

Schedule HVAC Service in McKinney Today

Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before summer hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in McKinneyCall (903) 482-4900

Recent Jobs and Reviews in McKinney, TX

Rated 4.9 out of 5 stars based on 19 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

McKinney, TX at a glance

Adon Complete Air Conditioning and Heating has completed 25 jobs in McKinney, TX between August 2025 and September 2025.

The most recent job was on September 30, 2025.

Adon Complete Air Conditioning and Heating has completed 159 jobs in McKinney, TX in the last 12 months. The first job there was in March 2020.

Job Locations and Reviews

Preformed dryer vent cleaning and heating maintenance on a single system gas unit. Presented client with before and after pictures of 5e dryer vent cleaning. On the heating maintenance I checked all safeties to ensure everything was in good working order, all tested within manufacturer specifications. Temperature being supplied to the home was 106 degrees and 75 coming into the unit. Filter did not need to be changed at this time. Unit was back to cooling and cooling upon departure. Provided estimates for a level 2 duct cleaning.
Preformed dryer vent cleaning and heating maintenance on a single system gas unit. Presented client with before and after pictures of 5e dryer vent cleaning. On the heating maintenance I checked all safeties to ensure everything was in good working order, all tested within manufacturer specifications. Temperature being supplied to the home was 106 degrees and 75 coming into the unit. Filter did not need to be changed at this time. Unit was back to cooling and cooling upon departure. Provided estimates for a level 2 duct cleaning.
Matthew C.
Matthew C. Checked in
Preformed dryer vent cleaning and heating maintenance on a single system gas unit. Presented client with before and after pictures of 5e dryer vent cleaning. On the heating maintenance I checked all safeties to ensure everything was in good working order, all tested within manufacturer specifications. Temperature being supplied to the home was 106 degrees and 75 coming into the unit. Filter did not need to be changed at this time. Unit was back to cooling and cooling upon departure. Provided estimates for a level 2 duct cleaning.
McKinney, TX 75071
Made adjustments to blower speed per tech support. Homeowner likes to keep the house particularly cold (68) this was causing discharge air temp sensor to trip on low temp when it was cooler outside (early morning/ late night). Per tech support adjusted cfm per ton from 400 to 450. Also made minor adjustments to discharge air temp sensor to prevent it from tripping as easily. Tech support stated to leave it be for 3 days and monitor the unit to see if the issue persists. Unit in good working order upon departure.
Made adjustments to blower speed per tech support. Homeowner likes to keep the house particularly cold (68) this was causing discharge air temp sensor to trip on low temp when it was cooler outside (early morning/ late night). Per tech support adjusted cfm per ton from 400 to 450. Also made minor adjustments to discharge air temp sensor to prevent it from tripping as easily. Tech support stated to leave it be for 3 days and monitor the unit to see if the issue persists. Unit in good working order upon departure.
Jesse V.
Jesse V. Checked in
Made adjustments to blower speed per tech support. Homeowner likes to keep the house particularly cold (68) this was causing discharge air temp sensor to trip on low temp when it was cooler outside (early morning/ late night). Per tech support adjusted cfm per ton from 400 to 450. Also made minor adjustments to discharge air temp sensor to prevent it from tripping as easily. Tech support stated to leave it be for 3 days and monitor the unit to see if the issue persists. Unit in good working order upon departure.
McKinney, TX 75071
I performed a 2 system heating maintenance on 2019 gas systems. 
I checked amps, capacitors, filters, electrical, drains, cleanliness, ducts, insulation, safeties, and provided a visual inspection of the outdoor units. I noticed that the ducts are beginning to build up dust again. I provided options to address these area of concerns. I offered upgrading the filters, duct cleaning, and air scrubbers. Customer did not approve estimates at this time.
I performed a 2 system heating maintenance on 2019 gas systems. 
I checked amps, capacitors, filters, electrical, drains, cleanliness, ducts, insulation, safeties, and provided a visual inspection of the outdoor units. I noticed that the ducts are beginning to build up dust again. I provided options to address these area of concerns. I offered upgrading the filters, duct cleaning, and air scrubbers. Customer did not approve estimates at this time.
Shelby S.
Shelby S. Checked in
I performed a 2 system heating maintenance on 2019 gas systems. I checked amps, capacitors, filters, electrical, drains, cleanliness, ducts, insulation, safeties, and provided a visual inspection of the outdoor units. I noticed that the ducts are beginning to build up dust again. I provided options to address these area of concerns. I offered upgrading the filters, duct cleaning, and air scrubbers. Customer did not approve estimates at this time.
McKinney, TX 75070
I performed a single system heating maintenance on a 2023 gas system. I checked amps, capacitor, filter, electrical, drains, safeties, cleanliness, filter, and rinsed the outdoor unit. Also, I ran an air quality test. I came back having high carbon dioxide and VOCs. I spoke with the homeowner about surge protection and addressing the air quality issues. Customer was not interested in addressing the carbon dioxide via a fresh air intake. However, she would like us to send a pdf file on the Airscrubber to further investigate and educate herself.
I performed a single system heating maintenance on a 2023 gas system. I checked amps, capacitor, filter, electrical, drains, safeties, cleanliness, filter, and rinsed the outdoor unit. Also, I ran an air quality test. I came back having high carbon dioxide and VOCs. I spoke with the homeowner about surge protection and addressing the air quality issues. Customer was not interested in addressing the carbon dioxide via a fresh air intake. However, she would like us to send a pdf file on the Airscrubber to further investigate and educate herself.
Shelby S.
Shelby S. Checked in
I performed a single system heating maintenance on a 2023 gas system. I checked amps, capacitor, filter, electrical, drains, safeties, cleanliness, filter, and rinsed the outdoor unit. Also, I ran an air quality test. I came back having high carbon dioxide and VOCs. I spoke with the homeowner about surge protection and addressing the air quality issues. Customer was not interested in addressing the carbon dioxide via a fresh air intake. However, she would like us to send a pdf file on the Airscrubber to further investigate and educate herself.
McKinney, TX 75072
Arrived on site, found upstairs unit blowing warm air. Proceeded to the outdoor unit and found condenser running. However condenser was only expelling cool air. Tested capacitor, on 3Ton 2014 condenser and found it to be a bit low but within range. Measured refrigerant pressures and found them to be very low. Discussed with homeowner possible options for moving forward, including leak seal. Homeowner asked for a call in the morning to work out a time for the comfort advisor to visit. Unit unplugged at breaker upon departure.
Arrived on site, found upstairs unit blowing warm air. Proceeded to the outdoor unit and found condenser running. However condenser was only expelling cool air. Tested capacitor, on 3Ton 2014 condenser and found it to be a bit low but within range. Measured refrigerant pressures and found them to be very low. Discussed with homeowner possible options for moving forward, including leak seal. Homeowner asked for a call in the morning to work out a time for the comfort advisor to visit. Unit unplugged at breaker upon departure.
Brayden W.
Brayden W. Checked in
Arrived on site, found upstairs unit blowing warm air. Proceeded to the outdoor unit and found condenser running. However condenser was only expelling cool air. Tested capacitor, on 3Ton 2014 condenser and found it to be a bit low but within range. Measured refrigerant pressures and found them to be very low. Discussed with homeowner possible options for moving forward, including leak seal. Homeowner asked for a call in the morning to work out a time for the comfort advisor to visit. Unit unplugged at breaker upon departure.
McKinney, TX 75072
Upon arrival, I learned from the customer that the issue had to do with the float switch. I investigated the issue brought to my attention. I found that the system was draining slow. I presented options to address the issue. The customer elected to only have me clear the drain. First I used a shop vac and followed it up with pressure. I flushed the drain after clearing it. The system is now draining properly and back to operating.
Upon arrival, I learned from the customer that the issue had to do with the float switch. I investigated the issue brought to my attention. I found that the system was draining slow. I presented options to address the issue. The customer elected to only have me clear the drain. First I used a shop vac and followed it up with pressure. I flushed the drain after clearing it. The system is now draining properly and back to operating.
Shelby S.
Shelby S. Checked in
Upon arrival, I learned from the customer that the issue had to do with the float switch. I investigated the issue brought to my attention. I found that the system was draining slow. I presented options to address the issue. The customer elected to only have me clear the drain. First I used a shop vac and followed it up with pressure. I flushed the drain after clearing it. The system is now draining properly and back to operating.
McKinney, TX 75071
Upon arrival, i spoke with the customer about the issue. The customer stated that they are unit is not blower air in cooling mode. I began looking into the wiring of the downstairs system. The blower motor was wired to use the yellow speed tap. This is one of the slowest speed taps available. When the temperature begins to drop outside, this could easily lead to freezing. I adjusted the wiring to high ( grey wire) to allow maximum air flow across the coil. I tested the system and ran it for approximately an hour with no issues. The system produced a 20 degree temperature drop, the refrigerant pressures are good for the current weather, and amps are good. The capacitor is reading 39/45 on the compressor side. I offered to replace it and the customer declined. System was cooling properly upon departure.
Upon arrival, i spoke with the customer about the issue. The customer stated that they are unit is not blower air in cooling mode. I began looking into the wiring of the downstairs system. The blower motor was wired to use the yellow speed tap. This is one of the slowest speed taps available. When the temperature begins to drop outside, this could easily lead to freezing. I adjusted the wiring to high ( grey wire) to allow maximum air flow across the coil. I tested the system and ran it for approximately an hour with no issues. The system produced a 20 degree temperature drop, the refrigerant pressures are good for the current weather, and amps are good. The capacitor is reading 39/45 on the compressor side. I offered to replace it and the customer declined. System was cooling properly upon departure.
Shelby S.
Shelby S. Checked in
Upon arrival, i spoke with the customer about the issue. The customer stated that they are unit is not blower air in cooling mode. I began looking into the wiring of the downstairs system. The blower motor was wired to use the yellow speed tap. This is one of the slowest speed taps available. When the temperature begins to drop outside, this could easily lead to freezing. I adjusted the wiring to high ( grey wire) to allow maximum air flow across the coil. I tested the system and ran it for approximately an hour with no issues. The system produced a 20 degree temperature drop, the refrigerant pressures are good for the current weather, and amps are good. The capacitor is reading 39/45 on the compressor side. I offered to replace it and the customer declined. System was cooling properly upon departure.
McKinney, TX 75072
jcg311690@gmail.com
jcg311690@gmail.com Checked in
Demand call for downstairs system partially frozen. Upon arrival customer stated that the compressor was starting to freeze up. He did provide me with air filters today and mentioned that he changes them about every 4 months. During my inspection when I was taking the filter out the system sounded like drowning victim. I checked pressures, electrical components and connections, and checked temperatures. The system wasn’t low on refrigerant and the only air restriction I found was the dirty air filter. I brought up the dirt in the system and the rusted drain pans, but customer isn’t interested in replacing the drain pans or cleaning the ductwork. System is running and cooling at this time.
McKinney, TX 75072
Found low voltage short causing system shut down. Repaired low voltage wire and left system cooling on departure. Tested with water hose to replicate heavy rain, no issues.
Found low voltage short causing system shut down. Repaired low voltage wire and left system cooling on departure. Tested with water hose to replicate heavy rain, no issues.
Jacob P.
Jacob P. Checked in
Found low voltage short causing system shut down. Repaired low voltage wire and left system cooling on departure. Tested with water hose to replicate heavy rain, no issues.
McKinney, TX 75070
Came out today for QC visit on new install. Started inside at t-stat (Ecobee) turned system on to check over unit. System is level all wiring is good no error codes. Measured 20 degree temp split. Found small air leaks around some of the supply ducts. I made sure to go over these ducts a second time with sealant. Drain line is draining at this time made slight adjustments to pitch of the drain. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Inspected filters as homeowner had work done in the house recently, found upstairs unit filter to be particularly dirty and replaced it. Found downstairs with a bit of dust bunnies but no major cause for concern, so I left it in place for now. I would recommend changing in a few months. Unit in good working order upon departure. Thank you for your time.
Came out today for QC visit on new install. Started inside at t-stat (Ecobee) turned system on to check over unit. System is level all wiring is good no error codes. Measured 20 degree temp split. Found small air leaks around some of the supply ducts. I made sure to go over these ducts a second time with sealant. Drain line is draining at this time made slight adjustments to pitch of the drain. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Inspected filters as homeowner had work done in the house recently, found upstairs unit filter to be particularly dirty and replaced it. Found downstairs with a bit of dust bunnies but no major cause for concern, so I left it in place for now. I would recommend changing in a few months. Unit in good working order upon departure. Thank you for your time.
Brayden W.
Brayden W. Checked in
Came out today for QC visit on new install. Started inside at t-stat (Ecobee) turned system on to check over unit. System is level all wiring is good no error codes. Measured 20 degree temp split. Found small air leaks around some of the supply ducts. I made sure to go over these ducts a second time with sealant. Drain line is draining at this time made slight adjustments to pitch of the drain. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Inspected filters as homeowner had work done in the house recently, found upstairs unit filter to be particularly dirty and replaced it. Found downstairs with a bit of dust bunnies but no major cause for concern, so I left it in place for now. I would recommend changing in a few months. Unit in good working order upon departure. Thank you for your time.
McKinney, TX 75071
Arrived at our clients home for a system replacement estimate. The system is dedicated to the laundry and master bedroom. Mr Phipps is looking for a standard single stage system. He is unsure how much longer e will be in the home but did not want an estimate for anything higher than a 15 SEER. I created 2 estimates and explained the key differences with both options. He is actively shopping and has another company giving him an estimate later today.
I will follow up tomorrow regarding his choice.
Arrived at our clients home for a system replacement estimate. The system is dedicated to the laundry and master bedroom. Mr Phipps is looking for a standard single stage system. He is unsure how much longer e will be in the home but did not want an estimate for anything higher than a 15 SEER. I created 2 estimates and explained the key differences with both options. He is actively shopping and has another company giving him an estimate later today.
I will follow up tomorrow regarding his choice.
Jacob P.
Jacob P. Checked in
Arrived at our clients home for a system replacement estimate. The system is dedicated to the laundry and master bedroom. Mr Phipps is looking for a standard single stage system. He is unsure how much longer e will be in the home but did not want an estimate for anything higher than a 15 SEER. I created 2 estimates and explained the key differences with both options. He is actively shopping and has another company giving him an estimate later today. I will follow up tomorrow regarding his choice.
McKinney, TX 75071
jcg311690@gmail.com
jcg311690@gmail.com Checked in
Demand call for zone gas system from 2022 having an error code 275 No Flame Sensed. Upon arrival the customers nanny showed me the thermostats and attic access. During my inspection I found the error code and it’s related to the heater I asked the nanny if she’s turned the heater on and she mentioned no. I asked the homeowner if they’ve turned the heater on and they also mentioned no. They haven’t had any power surges or flickers from what they can recall either. I reset the system to remove the error code and turned the heater on and off multiple times, the system never failed to start up and a code didn’t pop up. The system is running in ac mode at the moment and cooling properly. I asked the homeowner about joining our vip membership but he already has a plan with someone else.
McKinney, TX 75069
Upon arrival clients stated that he noticed the leaking drain pipe when he went to change his filters. Upon further inspection of the drain pipe I found that the coupling was not glued together as well as it should be. I cut out and replaced the T coupling, coupling and pvc pipe. I added spacing from the t coupling and coupling to give it less room for error. I tested the repair by pouring water into the drain pipe. No leaks occurred during testing. Unit is in proper working order upon departure.
Upon arrival clients stated that he noticed the leaking drain pipe when he went to change his filters. Upon further inspection of the drain pipe I found that the coupling was not glued together as well as it should be. I cut out and replaced the T coupling, coupling and pvc pipe. I added spacing from the t coupling and coupling to give it less room for error. I tested the repair by pouring water into the drain pipe. No leaks occurred during testing. Unit is in proper working order upon departure.
Matthew C.
Matthew C. Checked in
Upon arrival clients stated that he noticed the leaking drain pipe when he went to change his filters. Upon further inspection of the drain pipe I found that the coupling was not glued together as well as it should be. I cut out and replaced the T coupling, coupling and pvc pipe. I added spacing from the t coupling and coupling to give it less room for error. I tested the repair by pouring water into the drain pipe. No leaks occurred during testing. Unit is in proper working order upon departure.
McKinney, TX 75069
I returned on 8/25/2025 to install a condenser fan motor and perform maintenance. I checked amps, filter, drains, electrical, cleanliness, and safeties. The system is back to cooling to manufacture specifications.
I returned on 8/25/2025 to install a condenser fan motor and perform maintenance. I checked amps, filter, drains, electrical, cleanliness, and safeties. The system is back to cooling to manufacture specifications.
Shelby S.
Shelby S. Checked in
I returned on 8/25/2025 to install a condenser fan motor and perform maintenance. I checked amps, filter, drains, electrical, cleanliness, and safeties. The system is back to cooling to manufacture specifications.
McKinney, TX 75071
jcg311690@gmail.com
jcg311690@gmail.com Checked in
-Contactor -Turbo Multi Use Capacitor - 5-2-1 Hard Start Kit Demand call for main system not cooling the majority of the house down. Customer has a baby sleeping in the house so I wasn’t able to get into the house, but he showed me the outside system and was able to control the system from his phone. Customer turned on his nest to ac mode and we saw the compressor start on his 5 ton unit but his fan never started. Upon further investigation we found the capacitor to be bad, the contactor burning and arcing, and the compressor starting heavy. I offered a solution to the customer to at least address these issues to see if we can get the fan motor running and he agreed. After the repair the system started up along with the fan. I checked amp draws and they are within range. Customer stated the house is cooling down now and the system is running upon departure.
McKinney, TX 75071
Upon arrival, I found that the outdoor unit would turn the compressor on and attempt to turn on the condenser fan motor. I checked my DC voltage coming out of the board for the low volt portion of the motor 2DC volts. This indicated that the inverter board was no good. Jesse brought me a board that we had in the office. I installed it and tested the system. The condenser fan motor still did not turn on. I suspect that the condenser fan motor module has failed and resulted in a failure in the inverter board. I shut the outdoor unit down. I informed the customer, we will reach out with a timeline as soon as possible.
Upon arrival, I found that the outdoor unit would turn the compressor on and attempt to turn on the condenser fan motor. I checked my DC voltage coming out of the board for the low volt portion of the motor 2DC volts. This indicated that the inverter board was no good. Jesse brought me a board that we had in the office. I installed it and tested the system. The condenser fan motor still did not turn on. I suspect that the condenser fan motor module has failed and resulted in a failure in the inverter board. I shut the outdoor unit down. I informed the customer, we will reach out with a timeline as soon as possible.
Shelby S.
Shelby S. Checked in
Upon arrival, I found that the outdoor unit would turn the compressor on and attempt to turn on the condenser fan motor. I checked my DC voltage coming out of the board for the low volt portion of the motor 2DC volts. This indicated that the inverter board was no good. Jesse brought me a board that we had in the office. I installed it and tested the system. The condenser fan motor still did not turn on. I suspect that the condenser fan motor module has failed and resulted in a failure in the inverter board. I shut the outdoor unit down. I informed the customer, we will reach out with a timeline as soon as possible.
McKinney, TX 75071
The I arrived at the property to preform a system inspection.
I tested all the electrical components and refrigerant pressures for both upstairs and downstairs units.

The downstairs system has an outdoor Goodman condenser from 2022. The corresponding Goodman evaporator coil is from 2018 and the Amana furnace is original from 2005.
The outdoor condenser has extremely high start and run amps for the compressor motor.
The max start limit is 79, today I tested 60
Run amps limit is 16.7, today I tested 10.9
The capacitor is beginning to test low but still within manufacture specifications
The refrigerant pressures are also reading low.
The indoor furnace has the blower motor which is visibly leaking oil.
The max start amps is rated at 10.7 amps, today it tested over manufacture limit at 17.8 amps
The max run amp limit is 6.3, today it tested at 7.7
The downstairs unit was only cooling with a 16º drop. We look for a temperature drop of 17º to 20º. Another indicator that the unit is not oper
The I arrived at the property to preform a system inspection.
I tested all the electrical components and refrigerant pressures for both upstairs and downstairs units.

The downstairs system has an outdoor Goodman condenser from 2022. The corresponding Goodman evaporator coil is from 2018 and the Amana furnace is original from 2005.
The outdoor condenser has extremely high start and run amps for the compressor motor.
The max start limit is 79, today I tested 60
Run amps limit is 16.7, today I tested 10.9
The capacitor is beginning to test low but still within manufacture specifications
The refrigerant pressures are also reading low.
The indoor furnace has the blower motor which is visibly leaking oil.
The max start amps is rated at 10.7 amps, today it tested over manufacture limit at 17.8 amps
The max run amp limit is 6.3, today it tested at 7.7
The downstairs unit was only cooling with a 16º drop. We look for a temperature drop of 17º to 20º. Another indicator that the unit is not oper
Jacob P.
Jacob P. Checked in
The I arrived at the property to preform a system inspection. I tested all the electrical components and refrigerant pressures for both upstairs and downstairs units. The downstairs system has an outdoor Goodman condenser from 2022. The corresponding Goodman evaporator coil is from 2018 and the Amana furnace is original from 2005. The outdoor condenser has extremely high start and run amps for the compressor motor. The max start limit is 79, today I tested 60 Run amps limit is 16.7, today I tested 10.9 The capacitor is beginning to test low but still within manufacture specifications The refrigerant pressures are also reading low. The indoor furnace has the blower motor which is visibly leaking oil. The max start amps is rated at 10.7 amps, today it tested over manufacture limit at 17.8 amps The max run amp limit is 6.3, today it tested at 7.7 The downstairs unit was only cooling with a 16º drop. We look for a temperature drop of 17º to 20º. Another indicator that the unit is not oper
McKinney, TX 75072
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Inspected drain lines and treated to prevent blockages 
15. Rinsed condenser unit to promote heat exchange
16. Replaced and dated filters

Both contactors were displaying burning and pitting on the contacts, as well as testing over 20 ohms. The upstairs unit that has the coil leak last yr looked much worse than the other. Homeowner elected to replace this contactor before it fails. The other contactor we will continue to monitor.
1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Inspected drain lines and treated to prevent blockages 
15. Rinsed condenser unit to promote heat exchange
16. Replaced and dated filters

Both contactors were displaying burning and pitting on the contacts, as well as testing over 20 ohms. The upstairs unit that has the coil leak last yr looked much worse than the other. Homeowner elected to replace this contactor before it fails. The other contactor we will continue to monitor.
Brayden W.
Brayden W. Checked in
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Rinsed condenser unit to promote heat exchange 16. Replaced and dated filters Both contactors were displaying burning and pitting on the contacts, as well as testing over 20 ohms. The upstairs unit that has the coil leak last yr looked much worse than the other. Homeowner elected to replace this contactor before it fails. The other contactor we will continue to monitor.
McKinney, TX 75071
jcg311690@gmail.com
jcg311690@gmail.com Checked in
Second opinion on a bad blower motor on a gas system from 2018. Customer stated he has his home warranty come out and they just told him his blower motor was bad. He wasn’t so confident in the diagnosis so he called us for a second opinion. During my inspection I turned the fan on at the thermostat and noticed that nothing turned on. I then turned the thermostat to ac mode and the outdoor unit kicked on but the blower motor did not. I went up into the attic and made sure the blower motor was getting proper voltage to it which it was. So the customs does in fact have a bad blower motor. I showed my video to the customer so he can see how I check the motor and so he can see it not running. Customer asked for a quote to replace it under warranty and to join our vip membership. When I contacted trane about the blower motor it is under warranty but the home warranty already started the warranty. I informed the customer and he said he will contact his home warranty to cancel that because
McKinney, TX 75070
I picked up and returned to install 36x36 emergency drain pan. I ensured it had a downward pitch towards the drain, that it is level completely on drain side, and that I glued the connects for attaching the drain back.
I picked up and returned to install 36x36 emergency drain pan. I ensured it had a downward pitch towards the drain, that it is level completely on drain side, and that I glued the connects for attaching the drain back.
Shelby S.
Shelby S. Checked in
I picked up and returned to install 36x36 emergency drain pan. I ensured it had a downward pitch towards the drain, that it is level completely on drain side, and that I glued the connects for attaching the drain back.
McKinney, TX 75069
Emergency pan is completely rusted through. The primary drain line is pipped into the emergency pan. Customer approved the replacment of a 36x36 emergency pan.
Emergency pan is completely rusted through. The primary drain line is pipped into the emergency pan. Customer approved the replacment of a 36x36 emergency pan.
Shelby S.
Shelby S. Checked in
Emergency pan is completely rusted through. The primary drain line is pipped into the emergency pan. Customer approved the replacment of a 36x36 emergency pan.
McKinney, TX 75069
Jacob P.
Jacob P. Checked in
Answered Richard’s questions regarding that was installed on the furnace. He did mentioned that Tuesday off this week during the lightning storms. Nothing occurred and everything continued to work and function properly. I did connect the thermostat to wi-fi and ensured it was connected properly to his app on his phone. The system is running properly on departure.
McKinney, TX 75070
I arrived at the location to replace filters. As I was replacing the filters I did notice the condenser coil , evaporator coil and blower motor were extremely matted with debris and dirty. I provided estimates to have the coils cleaned condenser and evaporator, and the blower wheel pulled and cleaned. Unit was cooling upon departure
I arrived at the location to replace filters. As I was replacing the filters I did notice the condenser coil , evaporator coil and blower motor were extremely matted with debris and dirty. I provided estimates to have the coils cleaned condenser and evaporator, and the blower wheel pulled and cleaned. Unit was cooling upon departure
Matthew C.
Matthew C. Checked in
I arrived at the location to replace filters. As I was replacing the filters I did notice the condenser coil , evaporator coil and blower motor were extremely matted with debris and dirty. I provided estimates to have the coils cleaned condenser and evaporator, and the blower wheel pulled and cleaned. Unit was cooling upon departure
McKinney, TX 75070
jcg311690@gmail.com
jcg311690@gmail.com Checked in
-Contactor -Turbo Multi Use Capacitor - 5-2-1 Hard Start Kit Demand call for gas system from 2018 not cooling the house, just blowing warm air. Upon arrival the customer showed me the thermostat, attic access, and condenser outside. He mentioned that he changed the air filter and tried to reset power but nothing seemed to work. He then noticed that the thermostat (nest) was saying it wasn’t receiving power from the R wire. During my inspection I noticed the power switch in the attic was off after turning it on the system kicked on. I informed the customer the power switch was off and he believes he could’ve turned it off by accident when he was up in the attic changing the air filter. I then went outside with the customer and we noticed the unit outside wasn’t starting up. After further investigation we found that the capacitor was bad and the contactor was burnt up. I asked the customer if they’ve had any power surges or outages and they said yes in the last week or so. I had a
McKinney, TX 75071
jcg311690@gmail.com
jcg311690@gmail.com Checked in
Ac preventative maintenance on 2 gas systems from 2012, air filter sizes 20*25*1 for downstairs and 16*25*1 for upstairs. Customer mentioned that we’ve replaced some of the components on the upstairs system that are related to the ac side. During my inspection I checked temperatures, checked electrical connections and components, changed the air filters today, treated the drain lines, and inspected the systems for dirt buildup. Upstairs system: I found the ductwork to be very dirty along with the blower wheel. Due to the system inside being dirty the compressor is working harder than it should and when it starts up it is over amping. Downstairs system: ductwork is very dirty along with the blower wheel. Due to the dirt the blower motor is leaking oil and its capacitor is bad. These issues is causing the outside system to overwork and the compressor is over amping and causing the capacitor to overheat. Also has a rusted drain pan and outside disconnect is broken. I brought my f
McKinney, TX 75069

Your High Efficiency

Experts