Twenty-five service calls in Prosper between January and September 2026. That’s not a number we’re making up – it comes from our own technicians’ job logs. Adon Complete Air Conditioning and Heating has been running AC repair and HVAC service calls in Prosper, TX for years, and the homes here are exactly what our technicians are built for. Large floor plans, multiple systems, a mix of 2016-era Trane and Lennox units hitting the ten-year mark alongside brand-new 2023 and 2025 installs. We know what’s in these homes because we’ve worked on them. We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week.
What We See on Prosper Service Calls
Prosper’s homes tend to run two, three, or four HVAC systems. Many of the 2016 builds are reaching the point where capacitors, blower motors, and contactors are starting to wear. The newer 2023 and 2025 installs are still early in their life but need proper maintenance to protect the manufacturer’s warranty. Here’s a snapshot of what our technicians handle in Prosper regularly:
Four-system maintenance on a home with three 2016 Trane units and one 2025 Lennox. Two-system maintenance on back-to-back 2020 and 2023 Trane gas systems. Air balance diagnostics for a master bedroom hotspot. Mold inspection near an evaporator coil drain. Surge protector installations on outdoor disconnects. Blower motor replacements. Aprilaire filter upgrades from standard four-inch box filters. These are not unusual calls for Prosper. They’re typical.
Services We Offer in Prosper
AC Repair. All makes and models. From a failed capacitor on a 2016 unit to a blower motor replacement on a newer system, we diagnose it and fix it right.
AC and Heating Installation. Whether you’re replacing one aging unit or upgrading an entire multi-system setup, we size everything using a proper load calculation and back every installation with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club is $12 a month. Two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. For Prosper homeowners with multiple systems, staying on a maintenance schedule is one of the smartest ways to catch problems early.
Mini-Split Installation. In-law suites, bonus rooms, and detached garages are common in Prosper’s larger homes. Our technicians have installed ductless systems throughout Prosper as a practical solution for spaces the central system doesn’t reach well.
Heat Pump Installation and Repair. Heat pumps are turning up more frequently in Prosper’s newer builds. We install and service them alongside traditional gas systems throughout the area.
Indoor Air Quality. Our technicians have recommended UV light installations, Aprilaire filter upgrades, and duct cleaning on multiple Prosper service calls this year. If your systems are aging or you’ve had moisture or air quality concerns, we offer a free “What Are You Breathing?” screening.
Air Duct Cleaning. Several of our Prosper job notes this year flag ductwork and blower wheels that are overdue for cleaning on 2016-era systems. Professional duct cleaning improves air quality and helps the system run more efficiently.
Air Duct Repair and Sealing. Leaky ducts account for 20 to 30 percent of system output loss. We’ve found and fixed duct issues on Prosper homes that were causing uneven cooling between floors. We inspect, repair, and seal ductwork throughout the area.
About Adon Complete
Owner Jesse Villarreal has been in HVAC for over 27 years. We’re based in Anna and run calls throughout Collin County every day. As a Trane Comfort Specialist and Mitsubishi-authorized dealer we have factory-trained technicians on the brands most common in Prosper’s homes. We service everything, not just what we sell, and we give you a straight answer about what the system needs before we do any work.
Prosper and Surrounding Collin County Communities
We serve all of Prosper and the surrounding communities, including Celina, Frisco, McKinney, Allen, and Anna, throughout Collin County.
Common Questions From Prosper Homeowners
My home has three or four HVAC systems. Can you handle all of them?
Yes. Multi-system homes are standard for us in Prosper. We’ve done four-system maintenance visits, diagnosed air balance issues between floors, and replaced components on multiple units in a single visit. One call covers everything.
My 2016 Trane units are starting to have issues. Should I repair or replace?
That depends on what’s failing and the overall condition of the system. A capacitor or contactor replacement on a 2016 unit is usually worth doing. A compressor failure on the same system is a different conversation. We give you an honest assessment of what it would cost to repair versus what a replacement would run, and we let you make the call. Call (903) 482-4900 to schedule a diagnostic visit.
How often should multi-system homes in Prosper get maintenance?
Twice a year minimum. Spring before cooling season and fall before heating season. With multiple systems running, catching a failing capacitor or a dirty blower wheel early prevents the kind of emergency repairs that happen at the worst possible time. Our Adon Care Club at $12 a month covers all of your systems on those two visits.
Do you install surge protectors for HVAC systems in Prosper?
Yes. We recommend surge protectors on outdoor disconnects for Prosper homes, especially homes that took lightning-related damage or had a disconnect issue. We’ve installed them on multiple Prosper properties this year. A surge protector is a straightforward way to protect equipment that’s expensive to replace.
What areas near Prosper do you serve?
We serve all of Prosper and the surrounding Collin County communities, including Celina, Frisco, McKinney, Allen, and Anna.
Schedule AC Repair or HVAC Service in Prosper
Whether you need a repair, a maintenance visit on multiple systems, or just want to get a set of eyes on aging equipment, call our team at Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online. We know Prosper, and we’re ready to help.
Recent Jobs and Reviews in Prosper, TX
Prosper, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Prosper, TX between May 2025 and July 2025.
The most recent job was on July 25, 2025.
Adon Complete Air Conditioning and Heating has completed 30 jobs in Prosper, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Came out today for QC visit on new install. Started inside at t-stat (Trane) turned system down to check over unit. System is level all wiring is good no error codes. Getting over 20 degree temp split. Drain line is draining at this time. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Added 1 lb of 454b. Pressures were within manufacturer specifications. Found supply temps a bit high which prompted further investigation. Upon closer inspection I found the liquid line slightly kinked. Assured homeowner that we would be out this evening to address the issue and get it taken care of. Also performed maintenance on both other units. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Ch
The upstairs system is currently 19 years old Builder grade unit. The unit is extremely old unit strongly recommend to replace it for better, efficiency and warranties. Providing a discount due to all the repairs has been done on the upstairs unit The price we are providing is a cash price. If the customer wants to pay a credit card will be a 3% fee.
- Provided courtesy call to homeowner to confirm appointment time and verify address. - Met homeowner/Blake… he explained his issue with upstairs thermostat and that it will cool to 75°F but when they adjust it to 74 it can never reach 74°F. - Provided a demand for cooling at thermostat. - 20x25x4 Air Filter is clean and pointed correctly - System draining properly and not retaining water. - no air restrictions in air distribution assembly -System needs maintenance…outdoor condenser coils need cleaning. - checked all electrical components/amp draws - refrigerant charge is within manufacturer operating specifications. - system providing a 17.8+°F temperature drop across the coil - photo documentation attached - thermostat displays correct temperature. - AC diagnostics checklist form filled out and attached. - System cooling, draining, communicating/functioning properly and within manufacture specifications upon departure. - technician cannot find any issues affecting performance ot
Upon arrival met homeowner in driveway as he was just arriving as well. Homeowner escorted technician directly to attic to the equipment in question…System #1/upstairs. Equipment: Carrier Furnace Blower motor. M# 310AAV066110ACJA S# 2006A30520 - Diagnostic/inspection found blower motor housing and wheel are damaged/compromised causing system to become inoperable. - attempted to secure existing housing with new screw hole and reposition wheel on motor shaft only to find out the entire wheel was compromised as well. - Existing motor & capacitor still functional. - Shut system main power to off at power switch in attic. - creating estimate for blower motor housing and wheel replacement. - These are special order parts and need to call manufacturer for availability. Unable to determine parts available during after hours service. - Office/Adon customer service representative will contact homeowner with availability of parts and to schedule return trip for repairs.
Upon arrival found downstairs system set to 72 and holding at 71. Also upon arrival found upstairs thermostat display showing that no common wire was detected. Pulled off face plate and properly secured common wire to port and display showed all connections were properly made. Provided a call for cooling and system started to function properly again. Unable to access indoor equipment to provide minor AC diagnostics due to door being locked. Supply temperature of upstairs equipment suggests that system functions properly again. System functions properly again at this time. Called homeowner to go over diagnostics and to explain that it’s a simple issue due to a loose wire. In attempt to provide diagnostics and explain that this call back isn’t due to anything our company has previously repaired on last visit the homeowner couldn’t contain her anger saying it’s what we repaired previously and that she didn’t want to pay. In further attempt to explain everything the homeowner cut me off mi
Arrived at our client home for questions regarding repairs vs replacement for the equipment in their home. I was able to answer general questions about repair and clarified that any money put into equipment would only be to get them by. I confirmed that there is R22 repair options available but as a company we choose not to do them as they are not the best solutions for our clients. We then began discussing full system replacement options and I proceeded into the attic to check and measure duct work as well as document all equipment. We discussed uneven airflow to 2 bedrooms in the home and I was able to identify which ductwork would need to be addressed to help the rooms be comfortable. We discussed replacement options and I sent two estimates for 15 and 17 SEER equipment respectively. They are actively getting other quotes and would accept a follow up Wednesday of next week.
We performed 2 system cooling maintenance on 2004 gas systems. These systems are R22. We checked amps, capacitors, filters, drains, electrical, safeties, and cleanliness. We found that these units are on their last legs. The unit located on the right side of the home needs: blower replacement, water safety add ons, a blower capacitor, an emergency drain pan, the drain cleared, and a hard start kit. Also, it was discovered that the unit has parts of the coil that are plugged causing the refrigerant to bypass parts of the coil. The kitchen/other system needs: a blower motor, blower capacitor, water safety add ons, the drain cleared, contactor, and a hard start kit. Also, it was discovered that this unit has a refrigerant leak due to oil residue being present. We provided options to address the repairable issues and suggested system replacement. Customer declined repairs at the time of service.
I arrived to clients home for concerns that the home was not reaching desired temperature set point. I found that the upstairs unit was cooling and the downstairs unit was on but not cooling. I immediately proceeded outside and the outdoor condenser was not on. I checked voltage and it was not receiving power. I went back inside and confirmed the control board was sending the correct power to the outdoor equipment. It was. There were no burnt or compromised components to indicate a failed component. But the system had a short in power. I went back outside and was able to use an existing spare thermostat wire and rematches it to the indoor control board also. With this spare wire the unit was able to receive the correct voltage and immediately turned on. I checked the cooling temperatures and the unit is cooling with a perfect 20° drop. The unit will run for a few hours but will reach the desired set point, now that the repairs have been made.
This is an option for the downstairs unit blower motor. The motor is leaking oil. It is currently turning on and operational but it is showing signs of failure and may need to be replaced before the sale of the home is completed. A home inspector may not notice the actual condition of the motor but weather will determine how hard the equipment has to work and if it will fail before the sale is completed. We arrived at the property to replace the failing blower motor. It had developed more oil since the last visit. Once the motor was removed and replaced we tested the motor to ensure proper function and operation. The unit is cooling on departure.
1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Washed condenser unit to promote heat exchange Both systems cooling upon departure.

