Adon Complete Air Conditioning and Heating provides HVAC services in Richardson, TX, running calls throughout Dallas and Collin County from our home base in Anna. Richardson sits right along the border of both counties, and we serve the full city – from the older ranch-style homes near downtown and the University of Texas at Dallas area to the commercial properties along the Telecom Corridor on US-75. Whether your AC goes out in the summer heat or your furnace needs service before a cold front moves through, we’re a straightforward call away.
Richardson’s housing stock skews older than many of the cities we serve, with a lot of homes built in the 1960s, 70s, and 80s that are on their second or third HVAC system. We know these homes well – older ductwork, non-standard configurations, systems that have been patched over the years. We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we offer 24/7 emergency service throughout Richardson and the surrounding area.
HVAC Services We Offer in Richardson, TX
AC Repair: Same-day AC repair available throughout Richardson and the surrounding Dallas-Collin County area. We diagnose and repair all makes and models, and most calls are resolved in a single visit. When your air conditioning fails during a Texas summer, we treat it as the emergency it is.
AC Installation and Replacement: Richardson’s older homes are prime candidates for system replacement – an aging unit in a 1970s home working against original ductwork is costing you more every month than a properly sized new system would. We do a full load calculation, size the system correctly, and install it to manufacturer specs. All new installations come with up to a 10-year labor warranty.
Heating Repair and Installation: We service gas furnaces, heat pumps, and electric systems throughout Richardson. Older furnaces in Richardson’s established neighborhoods are one of the more common service calls we get – aging heat exchangers, worn igniters, and cracked flue pipes are all things we catch and repair before they become bigger problems.
HVAC Maintenance: Our Adon Care Club plan is $12 a month and covers two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. For Richardson homeowners with older systems, regular maintenance is the most cost-effective way to extend equipment life and catch problems early.
Ductless Mini-Split Systems: Older Richardson homes with additions, converted garages, or rooms that were never wired into the main duct system are good candidates for ductless mini-splits. We install single and multi-zone systems and they’re far more efficient than window units for spaces that need year-round comfort.
Heat Pumps: Heat pumps handle both heating and cooling from one system, and in Richardson’s climate – where winters are cold but rarely brutal – they’re a practical, efficient option. We install and service heat pumps throughout Richardson and can help you decide if one makes sense for your home.
Indoor Air Quality: Older Richardson homes can struggle with dust, allergens, and humidity issues that newer construction handles with tighter building envelopes. We offer air filtration systems, UV air purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Richardson area homeowners.
Duct Cleaning and Duct Repair: In a city with as much older housing stock as Richardson, ductwork is one of the first places we look when a system isn’t performing. Aging ducts leak conditioned air into attics and crawlspaces, drive up energy bills, and create uneven temperatures room to room. We inspect, clean, and seal ductwork throughout Richardson.
Why Richardson Homeowners Choose Adon Complete
- We know older homes. A significant portion of Richardson’s housing stock was built decades ago, and we’re experienced with the ductwork, equipment, and configurations those homes typically have.
- Owner Jesse Villarreal has over 27 years of HVAC experience – when you call Adon Complete, you’re calling a local company where the owner’s reputation is on every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, which means factory-trained installation and the full manufacturer warranty on every system we install.
- Same-day and 24/7 emergency service available throughout Richardson and Dallas County.
- The Adon Care Club is $12 a month – two tune-ups, priority scheduling, repair discounts, and no diagnostic fees year-round.
Neighborhoods and Areas We Serve in Richardson, TX
We provide HVAC services throughout Richardson, including the neighborhoods near downtown Richardson, the UTD campus area, Canyon Creek, Breckinridge Park, and the commercial corridors along US-75 (Central Expressway) and Campbell Road. We also serve Richardson’s neighboring cities including Plano, Garland, Allen, and McKinney.
Richardson, TX HVAC FAQ
How much does AC repair cost in Richardson, TX?
Most AC repairs in Richardson run between $150 and $600 depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil cost more. We give you a clear estimate before any work begins – call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Richardson?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Richardson and the surrounding area. When you call after hours you reach a real person who can get a technician to your home fast.
My Richardson home is older and the AC can’t keep up. Is it worth repairing or should I replace it?
For older homes in Richardson, we look at a few things: the age of the system, the cost of the repair versus a replacement, and whether the existing ductwork is up to handling a new system efficiently. If a system is 15-plus years old and needs a major repair, replacement usually makes more sense. We give free estimates on replacements and honest second opinions on repair-versus-replace decisions.
What HVAC brands do you service in Richardson?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer we have factory-trained expertise on those brands, but we don’t turn down a job because of what brand is on the equipment.
Do you handle commercial HVAC in Richardson?
Yes. Richardson’s Telecom Corridor and business parks are home to a lot of commercial office space, and we handle commercial HVAC service throughout the area. We work with offices, retail spaces, and light commercial properties, and maintenance agreements are available for businesses that want scheduled service and priority response.
Schedule HVAC Service in Richardson, TX Today
Whether you need same-day AC repair, a replacement on an aging system, or want to get on a maintenance plan, Adon Complete Air Conditioning and Heating is ready to help. Call us at (903) 482-4900 or click below to schedule. We also serve the surrounding communities of Plano, Garland, Allen, McKinney, and Wylie.
Recent Jobs and Reviews in Richardson, TX
Richardson, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Richardson, TX between October 2025 and April 2026.
The most recent job was on April 16, 2026.
Adon Complete Air Conditioning and Heating has completed 28 jobs in Richardson, TX in the last 12 months. The first job there was in May 2020.
Job Locations
Installation of hail guard on outside condenser.
Came out today for QC visit on new install. Started inside at t-stat (Trane) turned system down to check over unit. System is level all wiring is good no error codes. Getting over 20 degree temp split. Drain line is draining at this time. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Tested normal heating operation. Discharge air temperature sensor was not showing up in diagnostics. Advise homeowner that I have placed the sensor on order and could be out tomorrow between 1 to 3 to replace the sensor.System in good working order upon departure. Thank you for your time.
1. Visually inspected condenser coil for leaks and abnormalities. 2. Inspected condenser fan motor, blades and bearings. 3. Inspected, cleaned, and, tightened wiring connections. 4. Measured capacitance of compressor/fan motor capacitor. 5. Inspected and measured resistance of contactor 6. Measured compressor current draw. 7. Measured condenser fan motor amp draw. 8. Inspected and replaced return filter. 9. Inspected return plenum for dust or debris. 10. Inspected evaporator coil for cleanliness and oxidation. 11. Inspected blower motor/ blower wheel for dust and debris 12. Measured blower motor current draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested drain lines for proper drainage and treated to prevent blockages. 15. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. Found evidence of mice chewing on the drain holes of the outdoor condenser. This is not a major issue in and
Here are clean, professional summary notes you can use: ⸻ Service Summary Notes • Visited customer’s home to complete fresh air system setup. • Installed and connected transformer to the Aprilaire fresh air device. • Configured the controller to operate 15 minutes per hour to introduce fresh air into the home. • Verified system operation — fresh air system is now fully active and functioning as designed. • Confirmed all electrical connections and components are properly installed and secure. Status: System operating properly, no issues at this time.
Upon completion of my thorough evaluation, I found that both systems could benefit from having a full system cleaning done on them. By doing this you can help improve air quality in the home and help keep all major components working at their peak performance and efficiency. Also the client is currently using 20x25x1 inch filters. By upgrading to the Aprilaire 210 filters you can help combat against allergens and help keep all the major components clean. On the outside unit i notice there wasn’t any type of surge protection, by adding surge protection you can help prevent damage from being caused by lightning strikes and other types of power surges. I tested all electrical components on inside and outside units all tested within manufacturer specifications. I flushed and treated drain lines with total c and water. I rinsed the outside units with water. Units were cooling upon departure
Unit going into thermal over load on the blower motor due to an extremely dirty filter. Client wants filter changed. Advised will need to come back tomorrow to change it.
Preformed single system heating maintenance on a 2022 communicating gas furnace. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I did changed the filter for the client. Filter size is Aprilaire 213. I did find that the blower wheel has dust build up on the fins. This can cause drag and not allow the blower to work at full capacity. It also could result in having the motor prematurely fail. A cleaning of the blower wheel and assembly could help prevent any issue that may occur. I proceeded to visually inspect the outside unit. I found the outside unit to be in good proper working order. Unit was back to clients set point on the thermostat and working properly upon departure.
Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. All was good with heating checks. Unit is still looking very new. Homeowner was interested in surge protection. The provided estimate for surge protection and installed and tested surge protectors. Units in good working order upon departure.
Preformed Dryer Vent Cleaning. Preformed 2 system heating maintenance gas systems. I tested all electrical components and safeties on both units in the attic, along with cleanliness. All electrical components and safeties were testing within manufacturer specifications. Overall cleanliness of the unit was satisfactory. Clients filters did not need to be changed at the time of inspection. I ran air advice to test the air quality throughout the home. Air advice report came back testing very good air quality. I did notice both units inside and outside did not have surge protection on them. I provided estimates to have full system surge protection installed to both upstairs and downstairs units. I placed both thermostats back to cooling and both were cooling upon departure.
Came out today for QC visit on new install. Started inside at t-stat (Honeywell) turned system down to check over unit. System is level all wiring is good no error codes. Measured 20 degree temp split from supply to return. Drain line is draining at this time. System is clean. And operating as designed. Gas heat and safeties are working as intended without issue. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications, however we will want to check pressures again when it is warmer outside to ensure proper change level. Unit in good working order upon departure. Thank you for your time.

