Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX in April 2026.
The most recent job was on April 16, 2026.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Upon completion of my thorough evaluation, i tested all electrical components on the inside unit, all tested within manufacturer specifications. I changed the filter for the clients 25x25x1 and 14x14x1. The system cooling at 50 degrees supply and 70 return temperature. On the outside unit I tested all electrical components. All tested within manufacturer specifications. Flushed the drain lines with water and treated with total c. I also rinsed the outside unit with water. Unit was cooling upon departure.
Perform drain line. Unplugging with nitrogen. Before and After videos uploaded. Drain line Extensively tested with hot water to ensure proper drainage.
I performed a single cooling maintenance on a 2008 gas system. I checked amps, capacitors, filters, electrical, safeties and refrigerant. With how dirty the outdoor unit is and poor the temperature difference was, I determined that this system is slightly low on R22. Return temperature is 75 and it is supplying 61 degree air. The system ran for 30 minutes and only managed to drop the house by 1 degree. I noticed that the ECM condenser fan motor is slightly squeaking when starting up and shutting down. This indicates that the oil is gone and will likely seize up soon. There is a bloated capacitor that I determined to be for the low stage compressor. After speaking with the homeowners, they decided they would like a price on a complete replacement. The system replacement comes with a 10 year labor warranty.
Upon completion of my thorough evaluation I found that the full system could benefit from having a deep cleaning done on all major components, blower wheel, evaporator coil, duct work and drain lines. Also the condenser outside could use a deep cleaning as well. By having all of this cleaned you can help improve the systems performance and efficiency. I treated all electrical components on the inside and outside unit. All tested within manufacturer specifications. I was getting 54 degrees supply temperature and 69 return temp. I treated the drain lines with totalc and water. Unit was cooling upon departure.
Found unit number 10 with the float Switch tripped water in the primary drain line and small drips coming out of the secondary drain line. Drain pan also has some water in it. Perform drain line clearing and thoroughly tested drainage and unit operation to ensure proper functionality. Found no further issues at this time. Unit in good working order on departure.
Assessed stove exhaust vent and found a stud that would prevent us from centering the vent over the exhaust vent. Discussing moving the vent over to the other side of the stud using flexible corrugated duct and 6” hose clamps and connecting to roofline and installing cover. Advised homeowner that cover may not line up properly and provided estimate.
Upon completion of my thorough evaluation when I was testing the drain lines with with water, it was starting to back up in the funnel and was drain but extremely slow. This indicates a the drain line being almost fully clogged. Also there is no blow out valve. By adding the blow out valve it allows for easier access to clear the line. I tested all electrical components on both inside and outside units. All tested within manufacturer specifications. Clients filter did not need to be changed at this time. 20x20x1. Temperature being supplied to the home was at 51 degrees. I rinsed the outside unit off with water, unit was cooling upon departure.
I performed a single cooling maintenance on a 2016 straight electric system. I checked amps, capacitors, filters, electrical, cleanliness, drains, and safeties. Upon entering the home, I noticed the system was suffocating from the noise I was hearing from the return. The filter was 100% blocked. The return grill was matted causing its own air blockage with the filter out. As a courtesy, I cleaned the grill off to allow the system to breathe. I observed that the system NEEDS a thorough cleaning. I discovered that the ducts, evaporator coil, blower motor, and plenums are filthy with debris and growth formation. The equipment currently does not have a water safety switch to protect from water damage in the case of a clogged drain. The outdoor unit needs to be taken apart and chemically cleaned and vegetation needs to be removed. The capacitor in the outdoor unit is reading out of range and will likely fail soon. I reached out to the landlord and he would like to review the options I spok
Upon completion of my thorough evaluation I found both unit to have dust build up on the blower wheels and evaporator coils. By having them cleaned it will help with the performance and efficiency of the unit. I tested all electrical components on the inside units all was testing within manufacturer specifications. Treated and flushed both drain line with water and total c. Temp being supplied to the home for each unit was 52 for the main unit and the smaller unit was 55 degrees. I completed thorough evaluation of both units outside as well. I tested all electrical components on both systems, they are testing within manufacturer specifications. I rinsed both units with water at today’s visit. Units were cooling upon departure.
Upon completion of my thorough evaluation. I found that the capacitor for the compressor is failing at .04/55 the unit is currently coming on with capacitor testing like this but it’s a matter of when it decides to quit on the client. All other electrical components are testing within manufacturer specifications. Unit is extremely dirty inside and out but due to age of the unit did not want to offer clean as it could do more harm than good at this point. Unit was having 52 degree air supply the home. Unit was cooling upon departure

