Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between April 2026 and May 2026.
The most recent job was on May 13, 2026.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Performed a 2 system cooling maintenance. I checked amps, capacitors, filters, electrical, cleanliness, and drains. During my thorough evaluation, I discovered a couple of things that needs to be addressed. Both outdoor units need a chemical bath to ensure proper cleanliness/performance. The unit that services the master bedroom needs a capacitor due to it failing testing during the visit. Customer would like to wait on proceeding with repairs at this time.
Preformed blower wheel cleaning Removal and chemical cleaning of blower wheel rot remove dust causing drag on the motor causing it work harder and ultimately shorten lifespan of the motor.
Upon completion of my thorough evaluation, I tested all of the electrical on the inside unit. All tested within manufacturer specifications. There was some growth build up on the wiring of the blower motor. Filter did not need to to be changed at this time. 20x20x1. I tested and treated drain line with total c and water. Drain does have some build up in it but is draining as it should be. Supply temperature was at 48.degrees. I proceeded to the outdoor unit. I tested all the electrical components. The capacitor was testing below manufacturer specifications at 42.2/45 mfd. All other electrical components tested within manufacturer specifications. I rinsed the outdoor unit with water at today's visit. Unit was cooling upon departure.
Upon arrival, I discover the system in cooling with zero air coming out of the registers. I located the indoor unit. The system is frozen from the evaporator all the way up to the compressor. The compressor is running hot not allowing it to freeze indicating that there is an issue with the refrigerant. We will need to return tomorrow after it has time to thaw. I informed the property owner that getting towels under the system can help prevent potential water damage. Also, I told the property owner to tell the tenet to leave the system off because it will freeze again.
I performed a single cooling maintenance on a 2017 heat pump system. I checked amps, capacitor, filter, electrical, cleanliness, drains, and safeties. During my thorough evaluation, I discovered that mechanically the system is performing well. I observed that the indoor unit is in need of some cleaning. Customer declined cleanings during the visit and does not want to perform them. System is cooling upon departure.
I performed a 2 system cooling maintenance on 2018 heat pump equipment. I checked amps, filters, electrical, cleanliness, drains, and safeties. During my thorough evaluation, I noticed that the evaporator could use some cleaning. I spoke with the homeowner about options to help with respiratory issues that are being experienced. I offered to install Airscrubbers on the systems. Customer asked me to take a quick glance at the mini split. The mini split is having an issue. It is outside of warranty. Customer wants to watch the mini split before having it service. With past experiences with these mini splits, It appears that the thermistors are failing. A service call will be needed to fully determine the issue.
Zoned Cooling System Upgrade – Scope of Work Current System Condition The home currently operates on a single thermostat located on the first floor, which controls the entire two-story system. This creates a significant imbalance in comfort, particularly upstairs, where temperatures are consistently higher. This issue is primarily caused by: • Lack of independent temperature control for the second floor • Heat naturally rising and accumulating upstairs • Inability of the current system to distribute airflow based on demand ⸻ Proposed Solution: Custom Zoned Cooling System To resolve these comfort issues, we are proposing a complete zoning upgrade that will allow independent temperature control between the upstairs and downstairs areas of the home. ⸻ System Design & Modifications 1. Ductwork Reconfiguration • Modify and separate existing ductwork to create independent airflow paths for: • Downstairs system • Upstairs system (split into east and west zones) • This will inv
Upon completion of my thorough evaluation, the unit was working properly and I tested all electrical components on the inside and outside units. All tested within manufacturer specifications. I flushed the drain lines with water and totalc. Filter size is 20x25x1. It did not need to be changed at today’s visit, rinsed the outside unit with water. Unit was cooling upon departure.
Upon completion of my thorough evaluation. I found that the system was in good working order. I tested all of the electrical components on the inside unit, all tested within manufacturer specifications. I treated and tested drain line with totalc and water, client did not need filter changed at this time. Aprilaire 410 16x25x4. I tested all electrical components outside and all tested within manufacturer specifications. I rinsed the out door unit with water. Also I found that the unit does not have any type of surge protection. By adding surge protection you can help prevent any potential damage caused by light strikes and /or any other type of power surges. unit was cooling upon departure. I found that the unit does not have any type of surge protection. By adding surge protection you can help prevent any potential damage caused by light strikes and /or any other type of power surges. This comes with a $10,000.00 repair policy from the manufacturer on whatever equipment it is installe
Upon arrival home owner stated that she came into her laundry room and found standing water. Stated the technician that serviced her ac unit was back behind the washer. I explained to her that we were insuring the drain line was completely cleared. I found the drain hose for the washer to have been left out of the drain pipe. Returned drain hose to the drain pipe and tested the washer to make sure it was draining properly. We are providing the client with a floor fan to help insure all the water is cleaned up and dried.

