Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between March 2026 and April 2026.
The most recent job was on April 1, 2026.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Upon arrival, i turned the system on. It instantly began freezing. I turned the outdoor off to allow it tho thaw. Customer informed be it had only been off for about 30 mins. I opened the evaporator coil and found a block of ice. The furnace is from 1998 and the condenser is from 2004. The equipment is R22. I scheduled our comfort specialist to come out same day between 4pm to 6pm.
I performed a 2 system cooling maintenance on 2020 and 2023 systems. The 2020 is a communicating heat pump and the 2023 is a zoned propane. I checked amps, capacitors, filter, electrical, cleanliness, drains, and safeties. I noticed that the outdoor unit for the music room was becoming oxidized. This causes reduced performance. I brought to the customer’s attention that the outdoor unit for the main house did not have surge protection. Customer approved addressing both of these. I took care of the work the same day. Systems are cooling upon departure.
Upon completion of my thorough evaluation, I found that the blower wheel, evaporator coil and condenser coil to be dirty. The blower wheel is starting to to develop growth on it along with the evaporator coils. The condenser outside has some dust and debris build up on it was well. By having these major components cleaned, it can help with the over all efficiency and performance of the system. Also I did notice the unit doesn’t have any type of surge protection on it. By adding surge protection it can help the unit prevent being damaged by lightning strikes and other types of power surges. I changed the filter for the client Aprilaire 16x25x4. I flushed and treated the drain lines with total c and water. I rinsed the outdoor unit with water. I tested all electrical components on the inside and outside unit. All tested within manufacturer specifications. Temp being supplied to the home was 56 degrees and 79 return. Unit was cooling upon departure.
I performed a single cooling maintenance on a 2020 heat pump system. I checked amps, capacitors, filter, electrical, cleanliness, drains, and safeties. I noticed growth formation in the airhandler. If left unaddressed, it will continue to growth and become harder to deal with. The system does not have surge protection. The customer mentioned sometimes the lights flicker. After reviewing the design of the house, I deemed zoning would be a better fit to address the temperature difference of upstairs and downstairs. The customer would like our comfort specialist to reach out to speak more about it and potentially schedule a visit.
1. Rinsed condenser with water to promote heat exchange and reduce stress on system by removing dust and debris. 2. Visually inspected condenser coil for leaks and abnormalities. 3. Inspected condenser fan motor, blades and bearings. 4. Inspected, cleaned, and, tightened wiring connections. 5. Measured capacitance of compressor/fan motor capacitor. 6. Inspected and measured resistance of contactor 7. Measured compressor current draw. 8. Measured condenser fan motor amp draw. 9. Inspected and replaced return filter. 10. Inspected return plenum for dust or debris. 11. Inspected evaporator coil for cleanliness and oxidation. 12. Inspected blower motor/ blower wheel for dust and debris 13. Measured blower motor current draw. 14. Measured temperature differential from supply to return. 20 degrees measured. 15. Tested drain lines for proper drainage and treated to prevent blockages. Had some issues initially firing up the unit. Found slightly loose wiring connection on the outdoor unit. Af
CLN COND UNIT & CONDENSER COIL LEVEL 2 W/ CHEMICALS A DIRTY CONDENSER COIL LIMITS AIRFLOW AND LEADS TO HIGHER ENERGY BILLS AND A SHORTER UNIT LIFESPAN. IF LEFT UNATTENDED, DEBRIS CAN CLOG THE COIL. IT SHOULD BE CLEANED ON A REGULAR BASIS. DUE TO STUBBORN DEBRIS, SPECIAL CHEMICALS WILL BE USED TO CLEAN THE COIL.
Upon arrival, I discovered that something has destroyed the top of the condenser. Customer could not confirm how the damage occurred. I reached out to Johnstone supply in Sherman and priced the parts. They said they had a 2-3 day wait. Customer did not approve work during service. I collected the dispatch.
Upon arrival, I discovered that the thermostat was going into a constant delay when trying to use the outdoor unit. I immediately went to investigate the contactor. I hooked up a new one and tested it. I observed that the capacitor is heavily worn and the outdoor unit is matted with grass. Customer mentioned that he was interested in mini split pricing for a shed in the back yard. We will build a price and email it over. Scheduled the condenser cleaning for 3/24/2026 after 10am.
Perform maintenance on 2025 American Standard heat pump. 1. Rinsed condenser with water to promote heat exchange and reduce stress on system 2. Visually inspected condenser coil for debris/ dirty. 3. Inspected condenser fan motor. 4. Inspected condenser fan blades. 5. Inspected/ cleaned wiring connections. 6. Tested compressor/ condenser fan motor capacitor. 7. Checked compressor amp draw. 8. Checked condenser fan motor amp draw. 9. Inspected / replaced return filter. 10. Inspected return plenum for debris/ dirty. 11. Inspected evaporator coil. 12. Inspected blower motor/ blower wheel. 13. Checked blower amp draw. 14. Measured temperature differential from supply to return. 20 degrees measured. 15. Inspected drain lines and treated to prevent blockages Everything was testing with a manufacturer specifications with regards to cooling operation. Noticed no search protection on indoor or outdoor unit. Advised homeowner that it would be recommended to have search protection on these unit
Preformed duct cleaning estimate. I saw durning my thorough inspection of the ducts. I found the duct work to have substantial amount of dust/debris build up inside them and the plenum boxes. As well i found the blower wheel to be extremely covered with dust. Presented my options to the client. They would like to have some time to think it over. They also have 2 other companies coming out to give them estimates.

