Menu

Heating and Air Conditioning Services in Sherman, TX

Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.

We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.

Schedule Service in ShermanCall (903) 482-4900

HVAC Services We Offer in Sherman

We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:

AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.

AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.

HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.

Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.

Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.

Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.

Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.

Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.

Why Sherman Homeowners Choose Adon Complete

AC and Heating Service Throughout Sherman and Grayson County

We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.

Schedule Service in ShermanCall (903) 482-4900

Sherman HVAC FAQ

Here are some common questions we get.

How much does AC repair cost in Sherman, TX?

Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.

Do you offer emergency HVAC service in Sherman?

Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.

What HVAC brands do you service in Sherman?

We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.

Do you offer HVAC maintenance plans in Sherman?

Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.

What areas of Sherman do you serve?

We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.

Schedule HVAC Service in Sherman Today

Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.

Schedule Service in ShermanCall (903) 482-4900

Recent Jobs and Reviews in Sherman, TX

Rated 5.0 out of 5 stars based on 19 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction and appreciation for the service provided. Customers consistently praise the professionalism, knowledge, and efficiency of the technicians, highlighting their courteous demeanor and thorough explanations of work performed. A recurring theme is the company's responsiveness, with many reviewers expressing gratitude for quick arrival times, same-day or next-day service, and emergency availability during hot weather conditions. The honest, straightforward approach without upselling or gimmicks is frequently mentioned as a standout quality that builds trust. Customers appreciate the clear communication from both technicians and office staff, including timely updates on arrival times. The friendly and patient attitudes of service providers, even in stressful situations, earn particular commendation. Many reviewers indicate they would highly recommend the company and plan to use their services again, with several noting this is their preferred choice after multiple positive experiences. The tone is enthusiastic and grateful, with customers feeling valued and well-served, particularly during urgent situations involving AC failures in extreme heat. Overall, the reviews convey a strong sense of reliability, integrity, and customer-focused service that generates loyalty and satisfaction.

Sherman, TX at a glance

Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX between November 2025 and December 2025.

The most recent job was on December 11, 2025.

Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.

Job Locations

Matthew C.
Matthew C.
Preformed single system heat pump heating maintenance. I tested all electrical components on the inside air handler, all tested within manufacturer specifications. I proceeded outside to test all electrical components on condenser unit. All tested within manufacturer specifications. Client had already changed her filter. Unit was heating upon departure.
Sherman, TX 75090
Sherman, TX - Preformed single system heat pump heating maintenance. I tested all electrical components on the inside air handler, all tested within manufacturer specifications. I proceeded outside to test all electrical components on condenser unit. All tested within manufacturer specifications. Client had already changed her filter. Unit was heating upon departure.
Sherman, TX - Preformed single system heat pump heating maintenance. I tested all electrical components on the inside air handler, all tested within manufacturer specifications. I proceeded outside to test all electrical components on condenser unit. All tested within manufacturer specifications. Client had already changed her filter. Unit was heating upon departure.
Matthew C.
Matthew C.
Preformed dryer vent cleaning, Preformed 2 system heat pump heating maintenance. I tested all electrical components for the upstairs and down stairs units. All electrical on the i side equipment tested within manufacturer specifications. I proceeded to test all electrical components and start amps on the compressor. I found that on the upstairs unit the capacitor and Contactor were failing. Also the unit was starting up at 60 amps out of 59 amps. I also found that on the downstairs unit the start amps were over 100 amps. Client elected to have compressor saver bundle installed on the upstairs unit and a hard start kit installed on the downstairs unit. Both units are heating upon departure. -Contactor -Turbo Multi Use Capacitor - 5-2-1 Hard Start Kit x 2
Sherman, TX 75090
Sherman, TX - Preformed dryer vent cleaning, 

Preformed 2 system heat pump heating maintenance. I tested all electrical components for the upstairs and down stairs units. All electrical on the i side equipment tested within manufacturer specifications. I proceeded to test all electrical components and start amps on the compressor. I found that on the upstairs unit the capacitor and Contactor were failing. Also the unit was starting up at 60 amps out of 59 amps. I also found that on the downstairs unit the start amps were over 100 amps. Client elected to have compressor saver bundle installed on the upstairs unit and a hard start kit installed on the downstairs unit. Both units are heating upon departure.

-Contactor
-Turbo Multi Use Capacitor
- 5-2-1 Hard Start Kit x 2
Sherman, TX - Preformed dryer vent cleaning, 

Preformed 2 system heat pump heating maintenance. I tested all electrical components for the upstairs and down stairs units. All electrical on the i side equipment tested within manufacturer specifications. I proceeded to test all electrical components and start amps on the compressor. I found that on the upstairs unit the capacitor and Contactor were failing. Also the unit was starting up at 60 amps out of 59 amps. I also found that on the downstairs unit the start amps were over 100 amps. Client elected to have compressor saver bundle installed on the upstairs unit and a hard start kit installed on the downstairs unit. Both units are heating upon departure.

-Contactor
-Turbo Multi Use Capacitor
- 5-2-1 Hard Start Kit x 2
Shelby S.
Shelby S.
I installed the new control board and programmed it. I tested the unit for an extended amount of time to ensure proper operation.
Sherman, TX 75090
Sherman, TX - I installed the new control board and programmed it. I tested the unit for an extended amount of time to ensure proper operation.
Shelby S.
Shelby S.
Upon arrival, I found that the outdoor unit was not turning on. I opened the panel on the outdoor unit, and observed the communication light flashing red. This indicated that there is a loss in communication. I powered cycled the equipment and yielded the same result. I began testing the outdoor unit and was not receiving voltage on 1 and 2. I removed the plug and tested it again and still was not getting anything. I proceeded inside. I removed the plug and tested 1 and 2 out of the control board. I was not getting any communication voltage out of the indoor control board to go outside. I located the control board at Standard supply and got it on order.
Sherman, TX 75090
Sherman, TX - Upon arrival, I found that the outdoor unit was not turning on. I opened the panel on the outdoor unit, and observed the communication light flashing red. This indicated that there is a loss in communication. I powered cycled the equipment and yielded the same result. I began testing the outdoor unit and was not receiving voltage on 1 and 2. I removed the plug and tested it again and still was not getting anything. I proceeded inside. I removed the plug and tested 1 and 2 out of the control board. I was not getting any communication voltage out of the indoor control board to go outside. I located the control board at Standard supply and got it on order.
Sherman, TX - Upon arrival, I found that the outdoor unit was not turning on. I opened the panel on the outdoor unit, and observed the communication light flashing red. This indicated that there is a loss in communication. I powered cycled the equipment and yielded the same result. I began testing the outdoor unit and was not receiving voltage on 1 and 2. I removed the plug and tested it again and still was not getting anything. I proceeded inside. I removed the plug and tested 1 and 2 out of the control board. I was not getting any communication voltage out of the indoor control board to go outside. I located the control board at Standard supply and got it on order.
Matthew C.
Matthew C.
Preformed single system heat maintenance on a 2017 heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I cleaned the static air filter with water. I also adjusted damper to the second bedroom to allow less airflow to the room. I proceeded outside to test all electrical components on the outside unit. All electrical tested within manufacturer specifications. Unit was heating upon departure.
Sherman, TX 75092
Sherman, TX - Preformed single system heat maintenance on a 2017 heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I cleaned the static air filter with water. I also adjusted damper to the second bedroom to allow less airflow to the room. I proceeded outside to test all electrical components on the outside unit. All electrical tested within manufacturer specifications. Unit was heating upon departure.
Sherman, TX - Preformed single system heat maintenance on a 2017 heat pump. I tested all electrical components on the inside unit. All tested within manufacturer specifications. I cleaned the static air filter with water. I also adjusted damper to the second bedroom to allow less airflow to the room. I proceeded outside to test all electrical components on the outside unit. All electrical tested within manufacturer specifications. Unit was heating upon departure.
Brayden W.
Brayden W.
Arrive for heating maintenance on 2022 Trane heat pump. Homeowner stated all was well with regards to normal unit operation. Proceeded with heating maintenance as scheduled. 1.Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Tested capacitor and contactor (outdoor electrical) 15. Rinsed condenser unit to promote heat exchange 16. Tested emergency heat and found no issues Found error on thermostat for temperature sensor out of batteries. Advised homeowner to replace batteries to h
Sherman, TX 75092
Sherman, TX - Arrive for heating maintenance on 2022 Trane heat pump. Homeowner stated all was well with regards to normal unit operation. Proceeded with heating maintenance as scheduled.

 1.Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues
Found error on thermostat for temperature sensor out of batteries. Advised homeowner to replace batteries to h
Sherman, TX - Arrive for heating maintenance on 2022 Trane heat pump. Homeowner stated all was well with regards to normal unit operation. Proceeded with heating maintenance as scheduled.

 1.Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested compressor/ condenser fan motor capacitor.
6. Checked compressor amp draw.
7. Checked condenser fan motor amp draw.
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Inspected blower motor/ blower wheel.
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
14. Tested capacitor and contactor (outdoor electrical)
15. Rinsed condenser unit to promote heat exchange
16. Tested emergency heat and found no issues
Found error on thermostat for temperature sensor out of batteries. Advised homeowner to replace batteries to h
Jesse V.
Jesse V.
Arrived on site for duct replacement estimate. Began inspection at the crawl space. I initially noticed a large amount of water on the rear right side of house near some water pipe, however I did notice see any active dripping. When I brought his up to the homeowner he stated he knew about the issue and it was not a water leak. I took photos of many sagging and restricted ducts and 3 completely severed ducts. It was found that there are no saddles hanging the duct and there are many kinks and messy duct runs. I also noticed that the flue pipe has a run outside from the unit, however there is a t that is not properly sealed and is letting exhaust gasses out under the house. Discussed with homeowners the immediate safety concern with the flue pipe, the severed ducts, and improperly hung ducts. Homeowner informed us that it did not seem like they were receiving air in their front rooms. Proceeding to the attic I found 2 completely crushed ducts and 1 kink only allowing at best 50 percent
Sherman, TX 75090
Sherman, TX - Arrived on site for duct replacement estimate. Began inspection at the crawl space. I initially noticed a large amount of water on the rear right side of house near some water pipe, however I did notice see any active dripping. When I brought his up to the homeowner he stated he knew about the issue and it was not a water leak. I took photos of many sagging and restricted ducts and 3 completely severed ducts. It was found that there are no saddles hanging the duct and there are many kinks and messy duct runs. I also noticed that the flue pipe has a run outside from the unit, however there is a t that is not properly sealed and is letting exhaust gasses out under the house. Discussed with homeowners the immediate safety concern with the flue pipe, the severed ducts, and improperly hung ducts. Homeowner informed us that it did not seem like they were receiving air in their front rooms. Proceeding to the attic I found 2 completely crushed ducts and 1 kink only allowing at best 50 percent
Sherman, TX - Arrived on site for duct replacement estimate. Began inspection at the crawl space. I initially noticed a large amount of water on the rear right side of house near some water pipe, however I did notice see any active dripping. When I brought his up to the homeowner he stated he knew about the issue and it was not a water leak. I took photos of many sagging and restricted ducts and 3 completely severed ducts. It was found that there are no saddles hanging the duct and there are many kinks and messy duct runs. I also noticed that the flue pipe has a run outside from the unit, however there is a t that is not properly sealed and is letting exhaust gasses out under the house. Discussed with homeowners the immediate safety concern with the flue pipe, the severed ducts, and improperly hung ducts. Homeowner informed us that it did not seem like they were receiving air in their front rooms. Proceeding to the attic I found 2 completely crushed ducts and 1 kink only allowing at best 50 percent
Matthew C.
Matthew C.
Preformed single system heating maintenance on a 2023 Trane unit. It has 2 zones. I tested all electrical components and safeties on the inside unit. All tested within manufacturer specifications. Client did not have a filter a the time of inspection 20x25x4 the filter does need to be changed. No other concerns at this time. Unit was back to cooling up departure.
Sherman, TX 75092
Sherman, TX - Preformed single system heating maintenance on a 2023 Trane unit. It has 2 zones. I tested all electrical components and safeties on the inside unit. All tested within manufacturer specifications. Client did not have a filter a the time of inspection 20x25x4 the filter does need to be changed. No other concerns at this time. Unit was back to cooling up departure.
Sherman, TX - Preformed single system heating maintenance on a 2023 Trane unit. It has 2 zones. I tested all electrical components and safeties on the inside unit. All tested within manufacturer specifications. Client did not have a filter a the time of inspection 20x25x4 the filter does need to be changed. No other concerns at this time. Unit was back to cooling up departure.
Brayden W.
Brayden W.
Arrived on site for a heating maintenance on a 3 ton 2023 Trane furnace. Homeowner stated all was well with normal system operation. Began normal heating inspection as scheduled. 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested for gas leaks 6. Tested functionality and cleaned flame sensor 7. Tested functionality and cleaned pressure switches and ports 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Tested functionality and visually inspected surface igniter 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 15. Rinsed condenser unit to promote heat exchange 16. Measured start amps on outdoor unit Looking through the notes I had seen that a contactor had burned out early. This could be due to a manufacturer defect, but I wanted t
Sherman, TX 75092
Sherman, TX - Arrived on site for a heating maintenance on a 3 ton 2023 Trane furnace. Homeowner stated all was well with normal system operation. Began normal heating inspection as scheduled.
 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
15. Rinsed condenser unit to promote heat exchange
16. Measured start amps on outdoor unit
Looking through the notes I had seen that a contactor had burned out early. This could be due to a manufacturer defect, but I wanted t
Sherman, TX - Arrived on site for a heating maintenance on a 3 ton 2023 Trane furnace. Homeowner stated all was well with normal system operation. Began normal heating inspection as scheduled.
 1. Visually inspected condenser coil for debris/ dirty.
2. Inspected condenser fan motor.
3. Inspected condenser fan blades.
4. Inspected/ cleaned wiring connections.
5. Tested for gas leaks
6. Tested functionality and cleaned flame sensor
7. Tested functionality and cleaned pressure switches and ports
8. Inspected / replaced return filter.
9. Inspected return plenum for debris/ dirty.
10. Inspected evaporator coil.
11. Tested functionality and visually inspected surface igniter
12. Checked blower amp draw.
13. Measured temperature differential from supply to return. 20 degrees measured.
15. Rinsed condenser unit to promote heat exchange
16. Measured start amps on outdoor unit
Looking through the notes I had seen that a contactor had burned out early. This could be due to a manufacturer defect, but I wanted t
Matthew C.
Matthew C.
Preformed maintenance on a single system gas furnace 2008. I tested all electrical components and safeties. All tested within manufacturer specifications. I did find that the blower wheel was dirty. I offered a blower wheel pull and clean customer elected to have it cleaned today. Temperature being supplied to the house was at 127 and 76 on return. Unit was cooling upon departure. REMOVE AND CLEAN BLOWER ASSEMBLY LEVEL 1 A BLOWER ASSEMBLY MOVES AIR THROUGH YOUR SYSTEM. IF DIRTY, THE ASSEMBLY BLOWS THAT DIRT INTO YOUR SYSTEM. THIS CAN LEAD TO HIGHER ENERGY COSTS, ODORS AND DAMAGE TO THE UNIT.
Sherman, TX 75092
Sherman, TX - Preformed maintenance on a single system gas furnace 2008. I tested all electrical components and safeties. All tested within manufacturer specifications. I did find that the blower wheel was dirty. I offered a blower wheel pull and clean customer elected to have it cleaned today. Temperature being supplied to the house was at 127 and 76 on return. Unit was cooling upon departure. 



REMOVE AND CLEAN BLOWER ASSEMBLY LEVEL 1

A BLOWER ASSEMBLY MOVES AIR THROUGH YOUR SYSTEM. IF DIRTY, THE ASSEMBLY BLOWS THAT DIRT INTO YOUR SYSTEM. THIS CAN LEAD TO HIGHER ENERGY COSTS, ODORS AND DAMAGE TO THE UNIT.
Sherman, TX - Preformed maintenance on a single system gas furnace 2008. I tested all electrical components and safeties. All tested within manufacturer specifications. I did find that the blower wheel was dirty. I offered a blower wheel pull and clean customer elected to have it cleaned today. Temperature being supplied to the house was at 127 and 76 on return. Unit was cooling upon departure. 



REMOVE AND CLEAN BLOWER ASSEMBLY LEVEL 1

A BLOWER ASSEMBLY MOVES AIR THROUGH YOUR SYSTEM. IF DIRTY, THE ASSEMBLY BLOWS THAT DIRT INTO YOUR SYSTEM. THIS CAN LEAD TO HIGHER ENERGY COSTS, ODORS AND DAMAGE TO THE UNIT.

Your High Efficiency

Experts