Adon Complete Air Conditioning and Heating has been providing HVAC service in Sherman, TX, for years from our home base in Anna, just down Highway 75. Whether your AC goes out in July, your furnace won’t fire up in January, or you’re looking to upgrade to a more efficient system before the next season hits, our technicians are running calls in Sherman every week.
We service all makes and models, we’re a Trane Comfort Specialist and Mitsubishi-authorized dealer, and we’re available 24 hours a day, 7 days a week for emergencies. Whether you’re in Heritage Ranch, Canyon Creek, Westwood Village, or one of the established neighborhoods near the Grayson County Courthouse, we know this area and we’re ready to help.
HVAC Services We Offer in Sherman
We handle everything heating and cooling for Sherman homeowners and businesses. Here’s what we do:
AC Repair. Same-day service available throughout Sherman and Grayson County. We diagnose and repair all makes and models, and the majority of our calls are resolved in a single visit.
AC Installation. When it’s time for a new system, we size it correctly using a proper load calculation and install it in accordance with the manufacturer’s specifications. All new installations come with up to a 10-year labor warranty.
HVAC Maintenance. Our Adon Care Club plan is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, and 24/7 emergency access. It’s the smartest way to protect your system before the heat hits.
Mini-Split Installation. Ductless systems for rooms, additions, or whole-home comfort without ductwork. We install single- and multi-zone systems throughout Sherman and surrounding Grayson County communities.
Heat Pump Installation and Repair. Heat pumps provide both heating and cooling from a single system. This is a practical choice for Sherman homeowners who want year-round efficiency without separate units.
Indoor Air Quality. Air filtration systems, UV purifiers, humidifiers, dehumidifiers, and a free “What Are You Breathing?” screening for Sherman area homeowners.
Air Duct Cleaning. Professional duct cleaning removes allergens, dust, and debris from your system, improving air quality throughout your home.
Air Duct Repair and Sealing. Leaky ducts can cost you 20 to 30 percent of your system’s output. We inspect, repair, and seal ductwork throughout Sherman and Grayson County.
Why Sherman Homeowners Choose Adon Complete
- We’re close by. We’re based in Anna, TX, a short drive down Highway 75. Our technicians are in Sherman neighborhoods regularly and know the homes and properties on both sides of US-75.
- Owner Jesse Villarreal has over 27 years of HVAC experience. When you call Adon Complete, you’re not calling a franchise call center. You’re calling a local company where the owner is actively involved and his reputation is on the line with every job.
- We’re a Trane Comfort Specialist and Mitsubishi-authorized dealer. That means factory-trained installation and the full manufacturer warranty on every system we install. Not every HVAC contractor serving Sherman can say that.
- We service everything. Whatever brand you have, we can work on it. We don’t turn jobs away because the equipment isn’t ours.
- The Adon Care Club is $12 a month. Two tune-ups a year, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency access. It’s the most affordable way to keep your system reliable year-round.
AC and Heating Service Throughout Sherman and Grayson County
We service every neighborhood in Sherman including Heritage Ranch, Westwood Village, Canyon Creek, Parkhaven, O’Hanlon Ranch, and the established neighborhoods around downtown and the Grayson County Courthouse area. We also serve the surrounding Grayson County communities of Denison, Van Alstyne, Gunter, Howe, Tom Bean, Pottsboro, and Whitesboro.
Sherman HVAC FAQ
Here are some common questions we get.
How much does AC repair cost in Sherman, TX?
Most AC repairs in Sherman run between $150 and $600, depending on the type of repair. Simple fixes like a capacitor replacement or refrigerant recharge are on the lower end. More involved repairs like a blower motor or evaporator coil replacement will cost more. We provide a clear estimate before any work begins. Call (903) 482-4900 to schedule a diagnostic visit.
Do you offer emergency HVAC service in Sherman?
Yes. We offer 24/7 emergency heating and air conditioning service throughout Sherman and Grayson County. When you call after hours, you reach a real person who can get a technician to your home fast. A broken AC in a Sherman summer is not something that can wait until morning.
What HVAC brands do you service in Sherman?
We service all makes and models including Trane, Lennox, Carrier, Daikin, Mitsubishi, Goodman, Rheem, and more. As a Trane Comfort Specialist and Mitsubishi-authorized dealer, we have factory-trained expertise on those brands specifically, but we won’t turn down a job because of the brand on the equipment.
Do you offer HVAC maintenance plans in Sherman?
Yes. Our Adon Care Club is $12 a month and includes two seasonal tune-ups, priority scheduling, repair discounts, no diagnostic fees, and 24/7 emergency response. It’s the most affordable way to keep your system running reliably through Grayson County’s hot summers and cold winters.
What areas of Sherman do you serve?
We serve all of Sherman and the surrounding Grayson County communities including McKinney, Anna, Van Alstyne, Denison, Gunter, Howe, and Tom Bean.
Schedule HVAC Service in Sherman Today
Whether you need same-day AC repair, a new system installed, or just want to get on a maintenance plan before the heat hits, we’re ready to help. Call Adon Complete Air Conditioning and Heating at (903) 482-4900 or schedule online.
Recent Jobs and Reviews in Sherman, TX
Sherman, TX at a glance
Adon Complete Air Conditioning and Heating has completed 10 jobs in Sherman, TX in October 2025.
The most recent job was on October 30, 2025.
Adon Complete Air Conditioning and Heating has completed 138 jobs in Sherman, TX in the last 12 months. The first job there was in March 2020.
Job Locations
Equipment age: evaporator coil- 2013 condenser- 2019 furnace- 2015 I performed a single heating maintenance on a 2015 gas furnace. The system is a 2 stage communicating Amana. I checked amps, capacitor, filter, electrical, cleanliness, and safeties. I noticed that the system has a reasonable amount of dust present in the ducts and on the blower wheel, the outdoor unit was heavily compacted with build up, and the air scrubber bulb was burnt out. I provided an option to address these known issues. The customer approved and it is scheduled for November 24th 8am-10am arrival time. I collected a none refundable deposit that the customer is aware of.
The downstairs system and ducts are located under the home. I inspected what I could see to ensure the ducts would hold up to a duct cleaning. The upstairs unit has 2 ducts that are not able to be cleaned due to being smashed. I generated a price to replace these 2 ducts and clean everything. Customer mentioned air flow issues on the downstairs unit. Without full access, I cannot see if the ducts are damaged, and I do not have the duct cam to inspect. I advised that replacement and redesign will benefit the customer better than attempting to clean. I noticed a flue pipe that may be dumping CO out of it. This will need to be replaced for safety. I advised the customer get a CO detector for upstairs and downstairs to ensure their safety.
I
Heat preventative maintenance on a propane gas zone system from 2023 with air filter 210 and a heat pump from 2020 using filter 20*25*4. Customer did provide us with filters to replace today and mentioned that there hasn’t been any issues with the systems. Tried to do an air quality check in the main house but my equipment wasn’t getting any service. During my inspection I checked temperatures, checked electrical components and connections, cleaned sensors, and inspected the systems for dirt buildup. We did find dirt in the main system, brought it up to the customer and he requested an estimate to get the system cleaned. Overall the systems are running and heating properly, customer did renew his vip membership today
I performed a single system heating maintenance on a 2021 heat pump. I checked amps, heat kit, capacitor, electrical components, filter, cleanliness, air quality, and safeties. The system is performing in manufacture specifications. During my thorough evaluation, some potential issues stood out to me. These include: electrical, safeties, and cleanliness. While evaluating the indoor, I noticed some growth forming inside of the indoor unit. If left unattended to, it will become harder to contain. In a past visit, the customer and I had a discussion about air flow. I revisited options to address these concerns. The air quality check showed signs of high particles and chemicals and can cause uncomfortable conditions inside the home. The capacitor on the outdoor unit is reading at the minimum it can to remain inside of manufacture specifications. The units are not currently protected with surge protectors. I presented options to address these noticed concerns at the time of service.
I performed a single system cooling maintenance on a 2019 heat pump. I checked amps, capacitors, electrical, safeties, heat kit, and cleanliness. The system is performing inside of manufacture specifications. I spoke with the home owner about surge protection and the higher than suggested start amps. I presented pricing to install the extra safeties and start assist. I noticed the reversing valve wires were burning on the copper. I rerouted them before issue arose.
came out due to system not running. checked electricals first, diagnosed a failed cap, replaced and system started up. check contactor and compressor tested good. System is running and heating upon departure. Replaced capacitor under parts and labor.
Upon arrival spoke with Nina the property assistant. They had to cancel the appointment and would not like the diagnosis done today. They have some other concerns that need to be addressed first. Nina said she would call the Adon to explain more.
Preformed heating maintenance on a single gas system. I started by setting up our air advice machine to test the air quality of the clients home. I then proceeded to the garage for indoor unit attic access. I tested all safeties and electrical components for the furnace. All tested within manufacturer specifications. Temperature being supplied to the home was at 113 degrees. I did notice upon inspection of the blower wheel that it had a good amount of debris/dust build up. I also notice the unit did not have surge protection. After the air advice machine ran its report. I presented my findings to the homeowner. I left estimates for a blower wheel pul and clean, surge protection and air scrubber. Unit was set back to cool and was cooling upon departure.
Upon arrival, we began checking the unit labeled 4North. We found that the unit was low on R410a refrigerant. We began examining the unit for leaks and discovered a leak in the suction line service valve (video confirmation in file). To properly repair, we will need to remove the refrigerant as it cannot be saved, remove the service valve with a torch, install new service valve, remove the liquid line dryer (to ensure a good repair), install new liquid line dryer, vacuum the system (to remove contamination), and recharge the unit with virgin refrigerant. We examined the unit labeled 5North. We found that, not long after turning it on, the system would skyrocket in liquid side pressure. This would cause a high pressure limit trip. After investigating, the cause for the abnormal pressure spike, we determined that the liquid line dryer is clogged not allowing a free flow of refrigerant. We noticed that the unit had a suction line filter dryer. This is normally seen on a system that had

